ProTerm RAY 9-24K User And Installation Instructions Manual - page 14
Manual is about: Direct heating electric boiler
of
14
Supplied By www.heating spares.co Tel. 0161 620 6677
13
external wiring
-
to assurance a correct function of a preparation DHW it
ś
necessary fill the switching relay with following parameters:
switching contact current above 0,5 A / switching voltage 0-230 V, control voltage 230 AC
-
at the interconnection the electric boiler with the DHW tank it
ś
always necessary made it in accordance with
conditions in user and installation instructions
TS – pressure switch 0,8 Bar
HT – the emergency thermostat 100°C
PT – the operating thermostat max. 85°C
PR1, PR2 – the room thermostat 230 V / 0,1 A
HDO – ripple control (RC)
S-HDO – RC contactor
K1, K2 – cascade (only 21 kW and 24 kW)
R – switching relay
TC, TB1, TB2 – thermostat contacts of DHW tank