PROTRON PLTV-26M User Manual - page 2
Connecting to an Audio System
1. Using two RCA cables, connect the right (red) and left (white)
audio outputs in the output block on the display (AV OUT) to
the corresponding inputs on your audio system.
2. (OPTIONAL) If you have a powered (amplified) subwoofer,
connect a third RCA cable from the SUBWOOFER output on the
display to the subwoofer’s (or amplifier’s) input.
R
L
Audio
System
Powered
Subwoofer
Installing Batteries in the Remote Control
1. Remove the plastic battery compartment cover from the rear of
the remote.
2. Insert two AAA batteries. Be sure to orient the batteries as
indicated in the compartment.
3. Replace the cover.
Setting up Television Channels
1. Ensure the display is on and the signal source is set to TV.
2. Press
to bring up the On-Screen Display (OSD).
Contrast
Brightness
Saturation
Hue
Sharpness
Flesh Tone
Color Temperature
50
50
50
50
30
ON
Warm
Video
Select
Select
Exit
Exit
MENU
3. Press
until the TV menu shows.
Auto Search
Tuner Mode
Channel Skip
Channel Name
Blue Mute
Air
ON
TV
Select
Select
Exit
Exit
MENU
4. Press
to enter the menu.
5. Press
until Tuner Mode is highlighted and then press
to select it.
6. Press
until the appropriate system is highlighted and
then press
to select it.
Select Air if you are using an antenna, or Cable if you are
connecting the display directly to a cable TV wall outlet.
7. Press
to return to the TV menu.
8. Press
until Auto Search is highlighted and then press
to select it.
The display will automatically scan all television channels for
those with a strong signal.
For more information, refer to the User’s Manual.
26M/27M/32M
26/27/32
Operating the Display
1. On the remote, press
to turn the display on.
2. Press
until the desired signal source is selected (the name
of the currently selected signal source will display at the top
right of the screen).
3. If the source is set to “TV”, use
to change the channel.
4. Use
to adjust the volume.
Connecting to a PC
1. Set the video resolution on the computer to 1280 × 1024 or
less.
2. Connect the included VGA cable between the VGA output on
the computer and the VGA input on the display.
3. (OPTIONAL) Using the PC audio cable, connect the computer’s
audio output (LINE OUT) to the audio input on the bottom of
the display (PC AUDIO IN).
© 2005 Protron Digital Corporation
EZPLTV26M/27M/32M
Vertical fold
Vertical fold
EZPLTV26M_27M_32M.indd 2
10/10/2005 11:04:51 AM