ProWIN win-i User Manual - page 31
GB
31
MAINTENANCE OF THE ELECTRIC NOZZLE
1. Disconnect the power plug.
2. Remove potential set in hairs and carpet fibers with the crevice nozzle.
BASIC FUNCtIONS OF tHe eleCtRIC NOZZle
use of the electric nozzle
the electric nozzle is suitable especially for the maintenance of severely strained carpets and
carpet-floors (e.g. at walkways), but also for cushions and mattresses.
Of course you can also vacuum clean hard floors with the electric nozzle. turn of your room
cleaning system. Put the cable of the electric tube into the appropriate connection (see
component parts).
turn the room cleaning system back on. Activate the unlocking mechanism and tilt the
telescope tube. the engine starts automatically now. If you bring the telescope tube back
into vertical position, the engine will turn off.
Overload protection of the electric nozzle
the device has a slip clutch in form of a flat belt, which averts damages of the engine in case
of overloading of the engine, e.g. because of a blockage in the brush roller due to sucked in
bulky foreign substances or wrapped around fringes of the carpet. the problem makes itself
felt by a grinding noise in the power unit of the brush.
Should this situation ever arise, please proceed like this:
• turn off the electric nozzle as well as the room cleaning system
immediately and pull
out the power plug.
• Remove the cause of error, clean the brush roller if needed, and
let the flat belt be
replaced by the service if necessary.
• Afterwards you can put your device back into operation.