Proxel EPS-DUAL Installation Instructions & User Manual - User Manual
Pag. 12
USER MANUAL
1.OPERATING PRINCIPLE
EPS-DUAL is an innovative parking sensor that uses low energy electromagnetic waves and is
able to detect the approach of any kind of obstacle .
The activation of the device isobteined by the insertion of the back gear or by pressing the
activation button (if installed on front bumper) and confirmed by a signal of "OK". Once activated, the
EPS-DUAL generates around the bumper, on which is installed, a protection zone (Fig. 6). When
any obstacle present in the protection zone, tends to approach the bumper you will hear a series of
beeps.
WORKING EXAMPLE
A) As soon as the EPS-DUAL is activated the control functionality of the system is carried out in a
fraction os second.
In case of anomalies the speaker emits an audible warning signal consisting of 2 notes (one high
and one low) repeated 3 times. If this happens check the antenna connection to the ECU.
If the check is OK you hear a signal of two notes in quick succession to confirm the proper
functioning of the system. If installedon the front bumper the OK signal consists of a single note.
B) When approaching an obstacle the system activates the acoustic signal at a distance
between the bumper and obstacle (measured in the central area of the bumper) of about 60 / 70
cm with 3 types of sounds: