Prusa i3 Hephestos Settings Manual - Levelling The Print Bed
Other manuals for i3 Hephestos:
Printing Handbook
of
4
4 If it has not yet been adjusted, make sure the endstop-adjustment screw is in the
correct position and move the extruder to its starting position.
2
Levelling the print bed
Once you have adjusted the Z axis you need to level the bed, so that it is totally parallel to the X axis:
1 Start the levelling process by selecting the Control > Level plate options on the LCD
control panel.
Important
You can watch the videos on how to level the Z axis and the print bed here:
bq.com/gb/products/prusa-hephestos.html
!