PS Audio DirectStream Memory Player Owner's Reference Manual - page 10
4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 service@psaudio.com www.psaudio.com
Getting Started
Getting Started x
©2016 PS Audio Inc. All rights reserved.
®
Owner’s Reference
DirectStream Memory Player
access the full warranty period, it is necessary to register the unit with PS Audio. Registering the
unit will setup the DMP’s web access page that allows you to add, delete and edit any of the song
titles and cover art library. The web access page also provides
To the left of DMP’s outputs is an
Ethernet jack. Use this connector
to attach a network compatible
Ethernet cable with an appropriate
ferrite RF blocker collar on that
cable for best performance, to
take advantage of DMP’s cover
art, metadata information, and
update info. It is not necessary to
connect this to the home network
for normal playback duties of
DMP.
DMP will present metadata
contained on the disc, as well
as search PS Audio’s music
database for additional metadata.
DMP will automatically download the cover art and song titles of inserted discs if it is connected to
the Internet. To connect to the Internet you must plug in a network enabled Ethernet cable in the
back of the DMP. This connection should be to an Internet connected router or through a wireless
Ethernet bridge connected to a router. DMP’s connection to the Internet through this network
cable is automatic through any DHCP enabled network. Most Internet setups in the home or office
are DHCP enabled and connection should take place within a very short period of time.
You can look on the front touch screen for verification of connection. When you are connected to
the internet the words “Internet OK” will be displayed.
If the network is not connected, the words “No Connection” will be displayed on DMP’s front
panel.
The supplied SD card must reinserted in DMP’s rear panel SD card slot for this feature to work.
Cards are inserted with the gold pins facing down. If the SD card is properly inserted and present,
the touch screen will display Memory: OK. If the card is not present, the display will read No
Memory.
READY FOR POWER
Once everything has been connected, use a high quality AC cable to power DMP. Digital audio
equipment is sensitive to AC power and produce line noise from their digital circuitry. Make sure
you have a high quality power cable to operate DMP, and a Power Plant AC Regenerator if possible.
PS Audio produces an entire line of high quality quiet power cables that are generally accepted
as being some of the best in the industry. Whatever you choose, make sure it honors the music.
Ethernet
connector
Network
connection
Downloading
cover art
Turn on the
power