- DL manuals
- PS Audio
- Music Equipment
- MultiWave P1200
- Owner's Manual
PS Audio MultiWave P1200 Owner's Manual
Summary of MultiWave P1200
Page 2
Thank you for your purchase of the ps audio power plant. Your confidence and trust in our company and in our products, as evi- denced by your purchase, means a lot to us. Ps audio was founded in 1974 by paul mcgowan and stan warren. Then, as now, we dedicated the company to the design and manufac- t...
Page 3
The ps audio power plant series is designed to provide clean, safe, low-distor- tion, low-impedance, regenerated ac power for your audio and video equip- ment. There are four models, the p300, the p600, the p1200, and the p2000. Each model has the same features and functions, but they differ with re...
Page 4: Step 1
Step 1 remove from packaging. The power plant will arrive in a single container that is made with three elements: an outer shipping carton, an inner shipping carton, and a protective sleeve. Remove each of the three elements to expose the power plant. Be certain and save all the packing material in ...
Page 5: Step 4
Step 4 plug in your equipment. Important: the p300 model was never intended for power amplifiers, integrated ampli- fiers, or receivers that produce more than 50 watts per channel. Equipment that pro- duces more than 50 watts per channel should not be plugged into the p300. Make sure that the power ...
Page 6
Remove from packaging. The power plant will arrive in a single container that is made of three ele- ments: an outer shipping carton, an inner shipping carton, and a protective sleeve. Be certain to save all packing material in case you ever need to ship the power plant back to us. Position the power...
Page 7
We recommend the ps audio power link ac cord, which has been specifical- ly designed for use with the power plant. If you choose another ac cord, we strongly recommend that it includes no built-in filtering of any kind. That is, no ferrite beads, no networks built into boxes attached to the power co...
Page 8
After an extensive period of listening to the power plant in different systems, we have gained a lot of experience, and will attempt to summarize those listening experiences as follows: increased depth. Listen to a good recording that has some measure of depth that extends from the speaker plane to ...
Page 9
Tem and live with it a bit, but not be too impressed until i go back to where i started from and then realize how big a difference there was. Although it is always best to use the same track of music to evaluate per- formance, don't wear out that track and yourself. It is important to choose a piece...
Page 10
I use the front panel power switch of the dac to turn it on, then i switch on the cd player. This is the best method. Try different power cords. While we have implied, time and again, that the power plant is impervious to line conditions, that claim is not 100% correct. The small gray area has to do...
Page 11
And im, for any frequency selected on the front panel. This output is then fed into two, high-voltage operational ampli- fiers, powered from a separate plus and minus 25-volt supply, producing 10 volts rms ac, in phase and out of phase. Amplifier description. There are two power amplifiers in the po...
Page 12
Service should your power plant require service, please contact your dealer, dis- tributor, or our service department. Ps audio service and technical assistance: email: rcullen@calinet.Com telephone: 805-461-1213 fax: 805-461-0432 mail: ps audio service center 8793 f. Plata lane atascadero, ca. 9342...