PS Audio PerfectWave DAC Mk II Upgrade Kit - page 13
42.
This photograph shows a correctly installed I2s coax cable.
Move on to the final assembly section next and bypass the Type B assembly section.
Type B analog board procedure
The following instructions assume you have removed your MK1 Digital input board and have a type B analog
board.
The first step in the B analog model is to connect the I2S coaxial cable and mezzanine board assembly
between the type B analog board and the new Mark II Digital Input board. The proper cable assembly for
this process looks like this:
43. Step 1. Locate the 16 pin socket J2 on the analog board and insert the long cable and mezzanine board
into the socket. Make sure the board is correctly seated and that the coaxial connectors face in toward
the unit rather than toward the side of the unit.
44. Nothing more than light pressure will secure the cable.
45. Now reinstall the MKll digital board using the three 6-32 screws removed earlier
or using the new ones provided with your kit. Ensure that all of the ribbon cables are secure.
46. The next process involves plugging in the I2S coax connectors into the correct sockets on the digital
board. The coax cable is fragile and the space to work is limited so be patient and take your time with
this task. It may take you a few tries to get them plugged in. Note the color coding on both the I2S
cable and the on the MKll digital input board. These must match when connected.
Polarizing Tab
J3