PS Audio Power Plant P500 Operation Manual - page 11
Specifications
Output:
Power
-
500 Watts
Voltage
-
95 - 250 Volts
(depending on model)
Frequency
-
50 - 120 Hz
Current
-
7 Amps
Peak
-
10 Amps (soft limit)
Distortion (THD)
-
0.1%
Input:
AC input range
-
90-250 Volts
(depending on model)
Frequency input
-
50/60 Hz
Input capacity
-
750 VA
Power consumption -
35 Watts
(with no load)
General
Width
-
17.25 in
Height
-
4.25 in
Depth
-
13 in
Weight
-
33 lbs
Cooling system
-
forced convection
Warranty and Service
Inside the U.S. and Canada
PS Audio’s warranty is 3 years parts and labor, from
the date of original purchase. The warranty follows
the product itself regardless of ownership, new or
used.
Outside the U.S. and Canada
PS Audio has authorized distribution in many
countries of the world. In each country, the
authorized importing retailer or distributor has
accepted the responsibility for warranty of products
sold by that retailer or distributor. Warranty service
should normally be obtained from the importing
retailer or distributor from whom you purchased the
product. In the unlikely event of service required
beyond the capability of the importer, PS Audio will
fulfill the conditions of the warranty. Such product
must be returned at the owner’s expense to the PS
Audio factory. Contact your PS Audio distributor or
the PS Audio customer service department for more
information.
Service issues
Should your unit ever require service or if you have
any technical questions about the P500, you must
either contact your dealer (PS Audio if purchased
direct) or your PS Audio distributor. No equipment
will be received at our service facilities without an
attached RA number.
If purchased through an authorized PS Audio dealer
or distributor, the RA number must be obtained by
the dealer or distributor. If the product was purchased
from PS Audio direct, this can easily be obtained by
calling PS Audio at 720-406-8946 or by contacting
us via E-mail at .
11