PS Audio Power Plant Premier Owner's Reference Manual - page 9
4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 service@psaudio.com www.pspower.com
Quick Start Guide 5
Quick Start Guide
©2076 PS Audio International Inc. All rights reserved.
®
Owner’s Reference
Power Plant Premier
marked MultiWave or
CleanWave, the Premier will
activate the selected function
and the front panel will display
the associate word.
The button on the remote
labeled “MW” for MultiWave
toggles between MultiWave or
sine wave. In the MultiWave
position, the peak charging
time of the sine wave is
extended to help connected
equipment lower power
supply ripple and therefore
improve the performance.
MultiWave can have the
same improvement gained
from adding a larger power
transformer or more power
supply capacitance to
connected equipment.
The button on the remote
labeled “CleanWave” will
activate the CleanWave
function and the front panel
of the Premier will begin to
countdown the time left as
the Premier is applying the CleanWave signal. CleanWave places a series of higher frequencies that
ride on the main sine wave to help “degauss” connected magnetics. To make CleanWave effective,
make sure all connected equipment is on and functioning. CleanWave can be used between CD’s,
movies and vinyl. It is not recommended to activate CleanWave while you are listening as it may not
sound correct until CleanWave has fi nished its cycle.
There are two buttons on the remote labeled “Edit”. These are not used on the Power Plant and are
there for future products and features.
MultiWave and
CleanWave
MultiWave
CleanWave
Edit