PSA Products Pinkerton Quick Start Manual - Wizard
3
Because your camera is weatherproof, it requires less protection than weather-resistant cameras and it can
be placed in more exposed locations if needed. Keep in mind that most cameras are designed to operate
between 14°F to 122°F (-10°C to 60C°) with a relative humidity of up to 95%) and consider wind chill and
other environmental factors when selecting your location.
Legal Considerations. Ensure it is allowed by your local laws
before installing cameras.
Do Not Install Camera Behind a Window. If there is a light source
behind the camera, it would cause a reflection in the window that
will obscure events on the other side of the glass.Likewise, the
camera's infrared LEDs will reflect off the glass and shine into
the lens, thus degrading the image.
WIZARD
SETTING
D
Before turning on DVR, ensure that all connections are good.
POWER ON AND LOGIN
Connect the power supply, DVR will power up.
The LED labelled POWER on the front will illuminate.
After DVR starts, a WIZARD SETTING pops
up.Time, network, record and hard disk management
can be set.
Click device name box to pop up a keyboad
as below:
It supports digits,alphabets and symbols.
Click
Shift to input Capital letters and symbols; Click
Shift again to return.
Click
Next to present a network setting window.
The default Http Port is 80, the default server port
is 6036. Click Obtain an IP address automatically
to acquire network information or input IP address,
Subnet mask,Gateway, Preferred or Alternate DNS
server manually. This function is used to monitor
DVR through internet(Refer to Remote Survellance
Guidance for details).
Click Next to present a Recording Setting window.