1. DL manuals
  2. Q Digital
  3. Security Camera
  4. 1A-QP686
  5. Installation And Operation Manual

Q Digital 1A-QP686 Installation And Operation Manual

Manual is about: High Speed Dome Camera

Summary of 1A-QP686

  • Page 1

    Qdigital [año] installation and operation manual for high speed dome camera please read the operation manual carefully before installing and using this unit.

  • Page 2

    Safety precautions caution risk of electric shock. Do not open! Caution: to reduce the risk of electrical shock, do dot open covers. No user serviceable parts inside. Refer servicing to qualified service personnel the lighting flash with a arrowhead symbol, in an equilateral triangle, is intended to...

  • Page 3: Index

    Index 1. Important safeguards ---------------------------------------------------------------- 1 2. Description of functions ----------------------------------------------------------- 2 2.1 integrated multi-protocol decoder ---------------------------------------------------------------2 2.2 integr...

  • Page 4

    1 i. Important safeguards 1. All the safety and operating instructions should be read before the units is operated. 2. This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply you plan to use, consult your applian...

  • Page 5

    2 ii. Description of functions the intelligent dome camera is a hi-tech cctv product which incorporates high-clarity color camera, panoramic speed-variable pan/tilt, multifunctional decoder, universal character generator, cpu processor, memory chip into a whole. It can largely reduce connection and ...

  • Page 6

    3 the front part means optical multiplication while the rear part means digital multiplication. E. Description of electronic shutter: it is fixed on 1/50 sec after initialization when the camera is switched on, and the digital 50 appears on the screen. F. Setup of image effect: the camera works on o...

  • Page 7

    4 2.2.5 cam display: when it is set at on, the camera screen will be opened. 2.2.6 return: to return to main menu. 2.3 camera setup 2.3.1 slow shutter: frame accumulation with two options manual/automatic. When camera screen is opened under automatic state, ass displays on screen. 2.3.2 back light: ...

  • Page 8

    5 / slow / -fast / -normal / -slow in which the first three grades are scan less than 180° while the later three grades larger than 180°. Adjust speed by pan left/pan right, and operate and exit by open button. The start position and the end position of auto scan are set by options 1 and 2 in this s...

  • Page 9

    6 r s - 4 85 in the figure we find the preset point is no.1 with title of “no title”. Move cursor by pan left/right and modify data by tilt up/down. Press buttons for one second to speed up operation. Press close button to exit edit state and store modifications. The title of preset point has 8 char...

  • Page 10

    7 dome address states of coding switches dip-1 dip-2 dip-3 dip-4 dip-5 dip-6 dip-7 dip-8 dip-9 dip-10 1 on off off off off off off off off off 2 off on off off off off off off off off 3 on on off off off off off off off off 4 off off on off off off off off off off 5 on off on off off off off off off...

  • Page 11

    8 panasonic on off on off off on longcomity off on on off off on hunda600 on on on off off on lilin off off off on off on vicon on off off on on off molynx off on off on off on kalatel on on off on on off vcl off off on on off on reserved on off on on off on alec off on on on off on ultrak on on on ...

  • Page 12

    9 2 6 2 3 0 0 14 0 20 5 figure 3 2) the style of installation a) wall installation b) in-ceiling installation figure 4 c) indoor ceiling installation 7 figure 5 d) indoor embedded installation 137 195 figure 6.

  • Page 13

    10 1 2 5 137 figure 6-1 2. Steps of installation (taking wall-installing style as example) 1) unpacking the carton and carefully take out the dome camera and its attachments. 2) take out the cover of the wall-installed bracket (see figure 7). 3) take out system control wires from the bracket (see fi...

  • Page 14

    11 7) take out the "plug and play" connector d1 (figure 13). 8) connect the control wires of the system as per figure 14. 9) insert connector d1 into the corresponding socket. Take care not to leave much wires inside the ball cover but to pull them out of the cover as shown on figure 15. D1 video+ v...

  • Page 15

    12 a l m - 4 a l m - 3 a l m - 2 a l m - 1 g n d c o m n c n o alarm input alm-1 alm-2 alm-3 alm-4 alarm output no.1-channel alarm was activation, then call no.29 preset no.2-channel alarm was activation, then call no.30 preset d3 no.3-channel alarm was activation, then call no.31 preset no.4-channe...

  • Page 16

    13 q6: m2.5 5 round head black screw a d b q3: m4 1.25 stainless steel wood screw figure 19 figure 20 2) fix the pedestal assembly on the ceiling (figure 20). 3) aiming the “mark” on the ball at the notch on the pedestal, push the ball upward to the end and rotate clockwise until it is clicked (as s...

  • Page 17

    14 31 2) base on the red spot to draw the sign (reference to figure 32) 32 3) according the material of ceiling, choice the different tools to drill (reference to figure 33) 33 4) fixup the installation pedestal with the embedded mount (reference figure 34).

  • Page 18

    15 pedestal q1a: m4 12 countersunk head screw (3 pcs) figure 34 5) for easy installation, adjust the three swing mounting clips to let the distance between the clips and the flange a little longer than ceiling thickness 6) swing the three mounting clips to adhere to back box wall. Place the back box...

  • Page 19

    16 vi. Technical data table specifications size: 5.5 color to b/w ccd 1/4 color ccd horizontal scanning range: 360° horizontal scanning speed: 0-300°/s vertical scanning range: 0 90° vertical scanning speed: 0-120°/s scanning limitation: horizontal adjustable tv format: pal format,1/4 color sony ccd...

  • Page 20: Appendix

    17 dome camera out of control self check error switch on again bad connection of control press to connect well bad control of matrix switch on again appendix : lightning proof and surge signal proof the product adopts tvs lightning proof technology to prevent from damage by lightning strike below 15...

  • Page 21: Appendix

    18 appendix : the cleaning of clear down cover to obtain constant clear videos, user should clean the down cover periodically. Z be cautious when cleaning. Hold the down cover ring only to avoid direct touch to the acrylic down cover. The acid sweat mark of fingerprint will corrode the coating of do...

  • Page 22: Appendix      :

    19 form (refer to picture 2). 1) in the picture it is the factory default connection. The jumper is seated on pin2&pin3 and the termination resistor is not connected. 2) when connecting the 120 termination resistor, user should plug the jumper on pin1&pin2. And the termination resistor is connected....

  • Page 23: Appendix

    Wire diameter (mm) transmission distance power (va) feet (m) 0.8000 1.000 1.250 2.000 10 283 86 451 137 716 218 1811 551 20 141 42 225 68 358 109 905 275 30 94 28 150 45 238 72 603 183 40 70 21 112 34 179 54 452 137 50 56 17 90 27 143 43 362 110 60 47 14 75 22 119 36 301 91 70 40 12 64 19 102 31 258...

  • Page 24

    0.090 39 43 0.00636 0.100 38 42 0.00785 0.110 37 41 0.00950 0.130 36 39 0.01327 0.140 35 0.01539 0.160 34 37 0.02011 0.180 33 0.02545 0.200 32 35 0.03142 0.230 31 0.04115 0.250 30 33 0.04909 0.290 29 31 0.06605 0.330 28 30 0.08553 0.350 27 29 0.09621 0.400 26 28 0.1237 0.450 25 0.1602 0.560 24 24 0....