Q-Light S80L Operating Instructions
S80L / S80LK
Thank you for purchasing Q.Light product.
Please read this manual carefully before installing this system
for safe and long use of the product.
▪ Long self-life of light source by employing high-brightness LED
and suitable for machines having lots of vibration and impact..
▪ Excellent in diffusing signal light by employing unique
direct-diffusion system.
▪ Possible to select “steady light” or “flashing light” by using
built-in steady/flashing selection switch according to the
purpose of use.
▪ Material : Lens-AS, Body-ABS ▪ Protection Class : IP23
▪ Flashes(Flashing Type) : 60-80/Min.
1) S80L
▪ General Specification
Model
Rated
Voltage
Current
Weight
Flashes
Color
DC12V
0.090A
0.21Kg
DC24V
0.080A
0.21Kg
AC110V
0.042A
0.38Kg
S80L
AC220V
0.021A
0.38Kg
60-80/Min.
Red-R
Amber-A
Green-G
Blue-B
▪ External View Drawing
2) S80LK
▪ General Specification
Model
Rated
Voltage
Current
Weight
Flashes
Color
DC12V
0.090A
0.34Kg
DC24V
0.090A
0.34Kg
AC110V
0.042A
0.51Kg
S80LK
AC220V
0.021A
0.51Kg
60-80/Min.
Red-R
Amber-A
Green-G
Blue-B
▪ External View Drawing
Power line UL1015-NO.16(1.25sq) x 2C 400mm comes out from
the product.
▪ In case of product using AC voltage, connect the line without
polarity(wire color).
▪ In case of product using DC voltage, black line is negative(-).
Indoor Outdoor
▪ This product was manufactured with the structure for indoor use.
Installing in any direction is okay for indoor use.
▪ Outdoor use is limited at a place where no water or very little
water percolates. Mounting also should be done only with
vertical standing shape.
▪ Mount at the place where exists low vibration, low impact, low
moisture and low dust as long as possible.
▪ Refer to below information and drill necessary mounting holes on
OPERATING MANUAL
LED Steady/Flashing Light