Q-Light S80L Operating Instructions - page 2
profitable part of the product.
(Make sure PCD from external view drawing.)
▪ S80L : Fix the product by using nuts(M4-3EA) originally
equipped on mounting bolt on bottom of the product.
▪ S80LK : Fix the product by using nuts(M5-3EA) originally
equipped on mounting bolt on bottom of the product.
This product has a built-in switch(1) on assembling board for
steady/flasing selection. Refer to following drawing and
explanation for right operating.
1) Lens Removal
Remove lens by turning it counterclockwise and make sure
related parts on assembling board.
2) Selecting Steady/Flashing Type
Choose steady light or flashing light by using Steady/Flashing
selection switch(1). “L” mode of the switch is steady type and
“LF” mode is flashing type.
3) Lens Assembling
Assemble the product in reverse order of separating.
▪ If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem
on product operating. Make sure the using voltage does not
exceed +/- 5% of the rated voltage.
▪ If lens or body of the product is contaminated by chemicals such
as thinner,benzene, the product can be damaged, discolored
or deformed. Please be careful.
▪ Do not give strong impact to the product. It can be a reason of
wire disconnection or short circuit.
▪ Do not strongly pull the wire out from the product. It can cause a
disorder.
Situation
Main Cause
Solution
Non- Lighting Partly
LED is Partly Damaged
Supplying Higher Voltage
than Rated Voltage
Making Sure Using
Voltage
Feeble Lighting
Supplying Voltage Lower
Than Rated Voltage
Making Sure Using
Voltage
Wrong Operating L/LF
Selection Switch
Convert L/LF Selection
Switch
Lighting but
Non-Flashing
Problem L/LF Selection
Switch
Contact Q.Light or Their
Agent
Wrong Wiring
Making Sure Wiring
Neither Lighting nor
Flashing
No Power Supply
Making Sure
Power Supply
(S80L)
(S80LK)
Q-LIGHT CO., LTD.
http://www.qlightkr.com
E-mail : qlightkr@qlightkr.com
Seoul Office (Domestic Sales & A/S)
Tel) 02-2679-6152
Ansung BD A-312, 410-13 Sindorim-Dong, Guro-Gu, Seoul
Overseas Marketing Team / Plant
Tel) 055-328-4082 Fax) 055-328-4083
Plant #1 : 178-1 Woogye-Ri, Sangdong-Myun, Kimhae-Si,
KyungNam, Korea
Plant #2 : 417-1 Geumsa-Dong, Geumjung-Gu, Busan