Q-See QC40196 User Manual - Main Menu
MAIN MENU
QC40198/QC40196 User Manual
48 |
P a g e
5.3.1 General
General setting includes the following items. See
57H
Figure 5-3
X
.
Figure 5-3
System time: Here is where you set system time
Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
Date separator: There are three options to separate date: dot, beeline and solidus.
DST: Here you can set DST time and date. Enable DST function and then click set button. You will see an
interface shown in
X358H358H358H
Figure 5-4
X
.
Figure 5-4
Here you can set start time and end time by setting corresponding week setup. In
X359H359H359H
Figure 5-4
X
, enable date button,
you can see the interface shown in
X360H 360H 360H
Figure 5-5
X
. Here you can set start time and end time by setting corresponding
date setup.
Figure 5-5
Time format: There are two types: 24-hour mode or 12-hour mode.