Q-See QS206 Quick Start Manual

Manual is about: H.264 NETWORK DVR QS Series

Summary of QS206

  • Page 1

    Before you get started a: gather your components. You will need: 1. A 19” or larger vga pc monitor and vga cable or a television of any size. 2. A surge protector we strongly recommend that you use one that has the following specifications: • ul-1449 rated • clamping voltage of 330 or lower • joule ...

  • Page 2

    Connect the devices step 1 turning on the dvr 1. Connect the power cable to the dvr 2. Connect the power adapter to the power cable. 3a. Plug the power cable into a surge protector b. The qs408 and qs464 have a power switch on the rear panel which must be flipped to the “on” positon. All other model...

  • Page 3

    Camera set up step 6 connecting the cameras 1. Connect the bnc and power leads on the camera to the matching connectors on the power and video cable. Note: the male power end fits into the matching power lead on the camera. 2. Connect the bnc connector on the other end of the cable to any of the vid...