QBTech WiFi GSM User Manual - page 5
2.Preparation before using
2.1 Alarm Panel and Sensors
2.1.1 Control Panel: Front
2.2 Insert SIM Card
This system is WiFi & GSM intelligent security system, Once alarm occurs, the host will push alarm
message to the users via WiFi. If the WiFi network failure, the alarm panel will automatically switch to the
GSM network, sending SMS and making calls to alert users for alarming. Hence, we recommend you to
insert SIM card inside.
1.Select the appropriate SIM card.
2.SIM card is inserted into the host's SIM port.
Alarm Indicator( Red)
WiFi Signal( Blue)
Arm Indicator(Red)
2.1.2 Control Panel:Back
2.3 Plug Power & Turn On System
Record MIC
Listen in MIC
1.Plug power adapter to power port.
Tamper switch
Wireless signal indicator
GSM signal indicator
Power indicator
Record button
Power port
Power switch
4
Speaker
Siren( 80db)
SIM Socket
Wired zone terminal
Temperature and humidity
sensor probe terminal
WiFi Setting Button
2. Push power switch from OFF to ON for turning on the system.
Power Port
Power Switch
5