QCAMZ HD 720p User Manual - Initial Set Up

Initial set up

1.

 Make sure the camera is OFF before inserting or removing the Micro SD card! 

2.

 Unscrew the rear cap from the back of the camera 

③

. 

3.

 Put your Micro SD card (max up to 32GB) into the slot with the card label facing 

down (contacts up). Use your fingernail to do this. You will hear a click sound once 

the Micro SD card is in place. Then screw the rear cap back on tightly.

Only use Micro SD cards Class 6 or above.

4. 

If no Micro SD card is inserted into the camera, the LED light on top of the ca-

mera will start flashing red and green for approx. 30 secs and then auto shut-off. 

5.

The Micro SD card must be blank; meaning without images from other sources 

on it. If you are using a Micro SD card previously used with other cameras, please 

make sure you format the Micro SD card in your computer before using it with 

your QCAMZ HD. New cards can be used straight from the packaging.