QCAMZ HD 720p User Manual - Charging The Battery

Charging the battery

Unscrew the cap located at the back of the camera 

③

 and connect the camera 

with the USB cable to your PC 

⑤

 or charger (optional). The LED light will light up 

blue while charging and will turn itself off once the battery is fully charged. 

Before the first use charge the battery for 10 hours! 

You can record apporx. up to 120 minutes with one charge.

Power on/off

Turn on the camera // 

Press and hold the POWER/Shutter button for approx. 3 

seconds until the green LED turns on and the red LED flashes twice. The camera 

will vibrate once long, indicating it is now in stand-by mode.

Turn off the camera // 

Press and hold the POWER/Shutter button again for 

approx. 3 seconds. The red LED light will flash twice and go off. The camera will 

vibrate twice, indicating it switches off.

Standby mode // 

If the camera is in standby mode without activity, it will auto 

switch off after approx. 3 mins to conserve battery power.