QCI LS5T-37 Owner's Manual - page 5
4
protective hair covering to contain long hair, preventing it
from get caught in machinery.
DON’T OVERREACH
Floor must not be slippery. Keep proper footing and
balance at all times. Never stand on log splitter. Serious
injury could occur if the tool is tipped or if the cutting
tools is unintentionally contacted. Do not store anything
above or near the log splitter where anyone might stand
on the tool to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
Always pay full attention to the movement of the log
pusher.
Do not attempt to load the log on until the log pusher has
stopped. Keep hands out of the way of all moving parts.
PROTECT YOUR HANDS
Keep you hands away from splits and cracks which open
in the log; They may close suddenly and crush or
amputate your hands. Do not remove jammed logs with
you hands.
DON’T FORCE TOOL
It will do a better and safer job at its design rate. Never
try to split logs larger than those indicated in the
specifications table. This could be dangerous and may
damage the machine.
Don’t use log splitter for a purpose for which it was not
intended.
NEVER LEAVE TOOL RUNNING UNATTENDED
Don’t leave tool until it has come to a complete stop.
DISCONNECT POWER
Unplug when not in use, before making adjustments,
changing parts, cleaning, or working on the log splitter;
Consult technical manual before servicing.
PROTECT THE ENVIRONMENT
Take used oil to an authorized collection point or follow
the stipulations in the country where the log splitter is
used.
Do not discharge into drains, soil or water.