Qindao Hichanse Group ALZ513 Assembly Instructions Manual - page 14
*If you have opened the carton and removed all packages, please disregard the STEP 1 and 2. See the STEP 3 directly.
* Please keep these assembly instructions for future reference.
ASSEMBLY INSTRUCTIONS
** DO NOT COVER THE IGNITION SCREEN when placing the fake wood into the fire bowl. Always keep Ignition Screen visible. * *See
below WARNING and Figure .
STEP 1.(1) Open the carton and turn it upside down, make sure the 4 flaps of the carton being open up as below FigureSTEP 1. (2) Lift
off the carton carefully and be wary of the accessories inside falling away.Take away one box containing the fake wood (3) Take all the
packing materials away except for the polyfoam rounding the top of the firepit, See Figure STEP 1.
STEP 2. (1)
Turn the firepit heads up on a flat ground.
(2) Cut off the binding tape on the polyfoam
and remove all the polyfoam rounding the
top of the firepit.
(3) Cut off the tie fastened the regulator at
the metal stand and set it free for
installation to LP-Gas Tank.
See Figure STEP 2.
STEP 3
Ⅲ
Ⅰ
ⅠⅠ
14