QNAP iVW-FH233 User Manual - page 10
iVW-FH233 User Manual
10
Safety Warnings
1.
The iVW video wall controller can operate normally in a temperature between
0ºC–40ºC and in a relative humidity of 0%–95%. Please ensure the operating
environment is well-ventilated.
2.
The power cord and devices connected to the iVW video wall controller must provide
a correct supply voltage (100W, 90–264V).
3.
Do not place the iVW video wall controller in direct sunlight or near chemicals.
4.
Unplug the power cord and all connected cables before cleaning. To clean the iVW
video wall controller, wipe it with a dry towel. Do not use chemicals or aerosols to
clean the iVW video wall controller.
5.
Do not cover or place any objects on the iVW video wall controller to ensure normal
operation and to avoid overheating.
6.
Use the flat head screws in the product package to lock the hard disks in the iVW
video wall controller when installing hard disks.
7.
Do not place the iVW video wall controller near any liquid.
8.
Do not place the iVW video wall controller on an uneven surface to avoid it falling..
9.
Make sure the voltage is correct in the location where the iVW video wall controller is
installed. Contact the distributor or the local power supply company for more
information.
10. Do not place any object on the power cord.
11. Under no circumstances should you attempt to repair the iVW video wall controller.
Improper disassembly of the product may expose the users to electric shock and
other risks. For any enquiries regarding repairing the iVW video wall controller, please
contact the distributor.
12. iVW video wall controllers should only be installed in server rooms and maintained by
authorized server managers or IT administrators. The server room should be secured
and only accessible by authorized staff members.
Warning:
There is the possibility of an explosion if the battery is replaced incorrectly. Replace only
with the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
DO NOT touch the system fan as it may cause injury and hardware failure.