QNAP iVW-FH233 User Manual - page 18
3.4
Connect Cables
The cables that need to be attached are listed below
Figure 3-1:
•
HDMI input cable –
iVW-FH233.
•
HDMI output cables
controllers. Make sure the cables are connected to the correct monitors
in Figure 3-1.
•
Power cable – from the power adapter
Figure 3-1: Cable Connection
3.4.1
Connect the Video Source and
The video source directly connects to the
the video source to the iVW
1.
Attach the HDMI video cable to the
2.
Attach the HDMI video cable to the
3.4.2
Connect iVW-FH233 and
The iVW-FH233 directly connects to the
the iVW-FH233 to the display devices
1.
Attach the HDMI video cable
2.
Attach the HDMI video cable
iVW-FH233 User Manual
18
Connect Cables
ables that need to be attached are listed below and their connec
– from the video source (PC, console, player, etc)
output cables – from the iVW-FH233 to the LCD panels or other video box
controllers. Make sure the cables are connected to the correct monitors
om the power adapter.
onnection
Connect the Video Source and iVW-FH233
connects to the iVW-FH233 through an HDMI
iVW-FH233, follow these steps:
video cable to the HDMI output of the video source.
video cable to the HDMI input on the iVW-FH233
FH233 and the Display Devices
connects to the display devices through HDMI
to the display devices, follow these steps:
video cables to the HDMI output of the iVW-FH233
video cables to the HDMI input on the display devices.
FH233 User Manual
ctions are shown in
(PC, console, player, etc) to the
to the LCD panels or other video box
controllers. Make sure the cables are connected to the correct monitors as shown
an HDMI cable. To connect
output of the video source.
FH233.
cables. To connect
FH233.
display devices.