Qomo QD8000 Manual - page 10
brightness. To increase the brightness, press the “BRIGHT +” button. To
decrease it, press the “BRIGHT -” button. To return to the initial brightness
press the “AUTO” button.
WHITE BALANCE ADJUSTMENT
Each time the lighting condition changes, the user should adjust the white
balance of the CCD.
Press the “AUTO” button to adjust the white balance automatically.
AUTO ADJUSTMENT
One of the visualizer’s special functions is auto adjustment. Press the
“AUTO” button to auto adjust the brightness, the white balance and the focus.
TEXT/IMAGE MODE
Press the “TEXT” button to switch between image/text modes. To display a
text file, switch to the text mode to get a clearer text effect.
COLOR AND B&W MODE SWITCH
Press “B&W” once to enter the Black & White mode; press again to return to
the Color mode. (On the remote control)
VIDEO INPUTS
Press the “S-VIDEO/VIDEO” button to switch between S-Video and composite
video signals.
RGB INPUTS
Use the “CAM/PC1/PC2” button to switch between Camera and different RGB
signals. Each time the “CAM/PC1/PC2” button is pressed, it provides
seamless transitions among different sources such as Camera, COMPUTER
(IN), and RGB (IN).
Notes: COMPUTER OUT always outputs COMPUTER IN signals.
PROJECTOR ON/STANDBY
Press the “POWER” button to turn on the visualizer’s power and press the
“PROJECTOR POWER” button on the remote to turn the projector power on.
To place the projector on standby after
use, press the “PROJECTOR
POWER” button and hold for more than 2 seconds.
PROJECTOR INPUTS SELECTION
When the projector is connected to several input sources, use the
“PROJECTOR INPUT” button on the remote to switch between projector
signal inputs.
IMAGE ROTATION
In order to rotate the image, press the “ROTATE” button once, the displayed
image will be rotated clockwise. .
IMAGE REVERSION
To display a vertically mirrored image, press the “MIRROR” button. Press the
“MIRROR” button again to exit.
10