Qpets AF 100 Owner's Manual - page 5
Step 2-Set the feeding time and number of feedings per day
1. ‘1 07’ will be flashing now. The first digit-
1 represents either the 1
st
, 2
nd
, 3
rd
, or 4
th
daily feeding. Digit-3 and digit-4 are the
feeding time (in hour increments).
2. The LCD display show the 1
st
feeding
time (1 07) represent ( 1
st
feeding at 7am)
3. With (1 07) Flashing, press and hold the
SET key for 2 seconds until digit-3 & digit-
4 start flashing(07).
4. Press the TIMER key to set the desired
hour for feeding.Notice the (P) on the top left corner stands for PM when using
12 hour time.
5. Press SET key ONLY if you want to continue to set another feeding time.
If you do not wish to continue setting another one, then just press START to save
and exit.
6. Repeat 4-5 to set the desired hour for another feeding time. The feeder allows
MAX. 4 feeding times to be scheduled per day.
7. If you want to change the previous feeding schedule, press the Timer key and
then press the SET key and hold it for 2 seconds. This will allow you to go back to
the 4-5 for setting the feeding time again.
Note:
Feeding times must be set in ascending order for the feeder to work properly.
LCD displays the next feeding time. Press CLOCK to see current time.
Step 3-Set the feeding volume/portion size
1. Press the VOL key to display feeding volume/portion size
2. Press and Hold the SET key for 2 seconds until the digit-4 blinks
3. Press the VOL key to set the desired volume
4. Press the START key to confirm the volume/portion size
Note:
A Feeding volume of 1 equals ¼ cup of food, 2 equal ½ cup of food, and 3 equal
¾ cup of food and so on. Setting the volume/portion size to 0 represents the
maximum portion size which is equal to 10 portions/2.5 cups of food
4