Qpets AF 100 Owner's Manual - General Operation
General Operation
How to review the settings
1. Press the TIMER key to cycle through and view the feeding times. Only set
feeding times will be displayed. For example if only 2 feedings per day were set,
then only the 1
st
and 2
nd
feedings will display.
2. Press the VOL key once to view the volume/portion size and feeding days left
3. Press DAY key to display feeding days left.
4. Press the CLOCK key once to display the current time, the CLOCK icon will turn
on now.
5. If no key is pressed for more than 8 seconds, the display will switch back to show
the next feeding time with the timer icon flashing.
Note
: A flashing timer icon means the feeding time has not been reached while a
solid timer icon means the feeding time has already passed.
How to change a scheduled feeding time
1. Press the Timer key and then press the SET key and hold it for 2 seconds. This
will allow you to go back to set the feeding time again.
2. Press the TIMER key to change the desired hour for feeding. It will start from the
fist preset feeding time.
3. Press SET key ONLY if you want to continue to edit another feeding time.
If you do not wish to continue editing another feeding time, then just press
START to save and exit.
How to change a pre-set feeding portion size
1. Press the VOL key to display feed-volume/portion size.
2. Press and Hold the SET key for 2 seconds until the digit-4 blinks.
3. Press the VOL key to set the desired volume.
4. Press the START key to confirm the volume/portion size.
Note:
The volume/portion and number of consecutive days to feed share the same
display screen. For example, (20_4) represents 20 more days of scheduled feedings
with a volume/portion size of 4 (1 cup).
5