Qpets AF 108 User Manual - Assemble And Disassembly
7
6. Press the SET key to confirm your feeding numbers and feeding time which you
set. The Feeder will cycle once that means the feeder will start the new schedule
immediately.
How to change a Current Clock Time
1. Press the SET key and hold for 2 seconds to enter the CLOCK SET MODE. The
hour number will be blinking now.
2. Press the MODE key to set the hour.
3. Press the SET key to confirm hour. The minute number will be blinking now.
4. Press the MODE key to set the minutes.
5. Press the SET key to confirm minutes. Both the hour and minutes number will be
blinking now.
6. Press SET key to confirm the 12hr/24hr format if you do need to change the
12hr/24hr format. If need, press and hold the MODE key for 2 seconds to switch
12hr/24hr display. After you release the MODE key, the hour and minutes will
stop blinking and switch to 12hr/24hr display.
How to record voice message to be played at the feeding times
1. Press and hold the REC key, the Red LED light will turn on.
2. Speak to the feeder for your message. You have up to 6 seconds.
3. When finished, release the REC key.
4. Press the PLAY key to listen the message you just record. Repeat 1-3 if you want
to record it again.
Note:
Your message will be played 3 times at each feeding time
When need to replace the batteries
Change all the batteries when the RED LCD Indicated light FLASHES. Please use new
alkaline batteries.
Assemble and Disassembly
• A: LID – LID pins with the FEEDER BASE and push down. The LID pins only align one way
on the FEEDER BASE; do not use excessive force when installing the LID. Check for
proper alignment if you have trouble getting the LID to lock down on the FEEDER BASE