Qpets AF 108 User Manual - Cleaning And Care
8
• B: SLIDE COVER - Place the SLIDE COVER on
top of the FOOD BOWL so the finger tab is
in the opening of the LID
• C: FINGER TAB – For closing the SLIDE
COVER which will lock into the LID
• D: Food TRAY - The FOOD TRAY will seat
into the HUB in the FEEDER BASE in only
one position. Be sure the FOOD TRAY seats
properly onto the HUB
• E:HUB - The FOOD TRAY slides into this and
is what rotates the FOOD TRAY
• F: LOCK - is used to lock the lid to the
FEEDER BASE. Push down in the middle of
each LOCK and pull up using your fingertips.
• G:FEEDER BASE - Place the FEEDER BASE
on a flat level surface at a height that is
easy for you to see what you are doing
Assemble
1. Push in the middle of each LOCK and
pull up using your fingertips.
2. Remove the LID. (DO NOT pull the LID
off from only one side as it can damage the lock pins)
3. Take the SLIDE COVER out
4. Take the FOOD TRAY out
Disassembly
1. Put the FOOD TRAY back
2. Put the SLIDE COVER back
3. Put the LID back
4. Put the LOCK on
Cleaning and Care
• When the food tray starts getting dirty, you can DISASSEMBLE the LID, SLIDE
COVER and FOOD TRAY from the FEEDER BASE.
• Clean the LID, SLIDE COVER and FOOD TRAY in warm soapy water.
• Do not wash the LID, SLIDE COVER and FOOD TRAY in dishwasher, as parts may
become permanently damaged!
• USE a soft damp cloth to clean the FEEDER BASE. (DO NOT wash FEEDER BASE
with RUNNING WATER)