QRS Music Technologies Chili Manual - page 16
Page 16
Owners Manual
Unmixed Out
Mixed Out
Aux In
CD In
AMI Out
PMM Reset
IR Port
Mic In
To Pianomation
MIDI Through
MIDI Out Delayed
MIDI Out
MIDI In
Power
B
ACK
P
ANEL
F
EATURES
Analog
MIDI Out
(AMI Out)
Allows you to record a MIDI signal into an analog format, ie. video
tape. It is also used for transmitting the MIDI signal to Pianomation
from a remote location.
External
CD Inputs
(CD IN)
Connects an external off-the-shelf audio CD player. The unit is
equipped to recognize the type of CD (QRS or audio) and
automatically switch the outputs to the speaker system if an audio CD
is played.
A
UX
I
N
Since Pianomation can run from many sources, we have added an
additional input for a VCR, or a wireless signal from a PC, MP3 or
QRS media source.
Mixed
Outputs
(Mixed Out)
This output will mix background music with either the piano sound
from the built-in sound set or from the mike input, and distribute the
sound throughout the home/establishment in areas where the piano is
not located. This feature eliminates the need for a mixer, piano mic
and another set of inputs on the back of your stereo. The mixed
output will also be used when someone is performing.
Unmixed
Outputs
(Unmixed
Out)
This output will send only the background music to the speakers that
supplement the piano. When an audio CD is played, both left and
right channels play as they should, giving you another speaker with
your home entertainment system.
Power In
Plug the power supply in here. This is a 5 pin locking Din on Rev C
boards.
For Technical Support Call 1-941-597-5888
Page 53
R 1 D 1 R E C O R D
•
A
D D N E W T R K A D D D
’
R U M T R K A P P E N D S A V E
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
F 1 D 1 R E C O R D
R E C O R D N E W A D D N
–
E W T R K A D D D R U M T R K A P P E N D S A V E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Under Record Chili has the ability to:
1.
Record for extended periods of time.
2.
Assign channels, and instruments to your tracks.
3.
Load an ensemble and record your accompaniment from the piano playing.
4.
Record left hand and right hand together or separately.
5.
Record a video performance for playback.
O
NE
T
OUCH
R
ECORD
M
ENU
Pressing the
Record button
erases any
existing file in
the scratch pad
memory, starts
the metronome
ticker and waits
for the first note
event to start
recording.
Selecting Add New
Track will increment
the track and
channel by one.
When this is selected
the Metronome ticker
will start and the
previously recorded
track(s) will be heard
from the speaker.
Add Drum
Track - Many
times when you
are recording it
helps to have
your drum track
in the back. This
allows you to
add it when you
want to.
Append
will allow
you to
add onto
the end
of the
active
track.
Save will
allow you
to name a
track in the
scratch
pad mem-
ory and
store it on
a floppy.
Will record a track without
automatically assigning a channel.
It will not automatically clear the
existing scratch pad memory. In
this advanced mode you will be
required to designate a channel
and assign an instrument to the
track. This option bypasses the
quick record capabilities.
New stands for clear. When this is
selected the current track is
cleared from scratch pad memory.
Any other tracks stored in the
scratch pad will be maintained In
order to clear all tracks hold the
Clear button down for 2 seconds.
Pressing
Stop after
recording
will bring
you to the
Quick
record
home
screen
shown
above.
A
DVANCED
R
ECORD
M
ENU
Assign -
will all you
to change
the instru-
ment as-
signment on
each of the
channels.