QS k10at User Manual - page 13
FUNCTION INSTRUCTION 20
Function Instruction
5. Press “F+7”, input number 05000.
6. Press EXIT.
7. Press “#”, then press A or B to choose channel 02 or input number 02,
press C to save the receiving channel.
8. Press “#”, then press A or B to choose channel 02 or input number 02,
press D to save the transmitting channel.
Channel delete setting
It can delete all channel information.
Steps as follows:
1. Press EXIT, and turn on the power at the same time, release the button,
delete all channel information.
NOTE:
Delete the channel alertly for unnecessary troubles of saving again.
Low Power indication
Battery icon twinkling,it means low power, pls change the battery.
●
If power lower than 5.5V, you will hear voice prompt, then the power will be
off automatically.
●
Jacklight
Press( ), the jacklight is ON. Press it again, the jacklight is OFF.
21 CTCSS
CTCSS
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50