QSC GXD Quick Start Manual - page 5
5
TD-000449-00-C
Main Navigation Menu
See
Figure 9
From HOME
ENTER
1. Previous selection – PRESETS
2. Currently selected – STEREO DSP (or DSP A and DSP B)
3. Next selection – UTILITIES
4. Instructions
Confi gurations
There are four basic types of confi guration:
•
Figure 10
– 2-channels in, stereo DSP, 2-channels out – Channel controls are linked, audio signals are not combined. (P1 through P7)
•
Figure 11
– 2-channels in, separate DSP, 2-channels out – Channel controls are not linked except Sensitivity. (P8 through P10)
•
Figure 12
– 1 or 2-channels in (mono summing), separate DSP, 2-channels out – Channel controls are not linked except Sensitivity. (P11 through P18)
•
Figure 13
– 1 or 2-channels in (mono summing), stereo DSP, 2-channels out – Channel controls are linked, audio signals are combined. (P19 and P20)
The confi gurations are selected using the presets. Refer to the GXD User Manual for details of all 20 available confi gurations.
PRESETS
A preset confi gures the inputs and outputs, along with setting the DSP. When you make changes to the DSP, you can save your setup in any of the 20
preset locations.
View Current Preset Confi guration
From HOME
HOME
To return
HOME
PRESET RECALL
Recall a preset to confi gure the amplifi er to meet the requirements of your loudspeakers and installation.
There are 20 Presets. See
Figure 15
1. From HOME
ENTER
2.
B
PRESET,
ENTER
3.
B
PRESET RECALL,
ENTER
4.
B
the preset you want,
ENTER
ENTER
PRESET SAVE
Saves the active preset with any DSP changes. See
Figure 16
1. From HOME
ENTER
2.
B
PRESET,
ENTER
3.
B
PRESET SAVE,
ENTER
ENTER
— Figure 9 —
P1: ST SAT FULL RANGE
ENTER TO SELECT
1
2
STEREO DSP
PRESETS
UTILITIES
3
4
— Figure 10 —
2
ST
DSP
B
1
A
— Figure 11 —
2
DSP
B
1
A
DSP
— Figure 12 —
2
DSP
B
1
A
DSP
— Figure 13 —
2
ST
DSP
B
1
A
— Figure 14 —
HOME TO RETURN
+
P1: ST SAT FULLRANGE
2
ST
DSP
B
1
A
— Figure 15 —
PRESET > RECALL
ENTER TO SELECT
P20: MONO SUBS 100 HZ
2
ST
DSP
B
1
A
— Figure 16 —
P1: ST SAT FULL RANGE
ENTER TO SELECT
PRESET SAVE
PRESET RECALL
PRESET SAVE AS