Touchmix™-30 pro user manual firmware version 1.0 touchmix-30 pro 1001108-01-a *1001108-01*.
Ii 1001108-01-a explanation of terms and symbols the term “warning!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term “caution!” indicates instructions regarding possible damage to physical equipment. If these i...
Iii 1001108-01-a maintenance and repair arninng!: advance technology, e.G., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional ...
Iv 1001108-01-a table of contents maintenance and repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Iii fcc statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
V 1001108-01-a qsc nxd amplifier settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 phantom power (+48v) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Vi 1001108-01-a touchmix-30 pro™ reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 netting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Vii 1001108-01-a sub nroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 sub nroup − overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Viii 1001108-01-a miscellaneous features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
1 1001108-01-a touchmix™-30 pro how to important!: this user manual applies to mixers with firmware version 1.0 installed. Earlier firmware releases do not support all of the functions described and some operations may differ. Register and update we know you want to get right to using your touchmix-...
2 1001108-01-a there are circumstances when it’s useful to recall a scene but omit certain settings from being changed. The touchmix-30 pro offers these recall options: • omit levels: when switched on, the scene will be recalled without making any change to any level settings. • omit outputs: when s...
3 1001108-01-a you’ve just dialed in the settings for an input channel. You’ll also notice that the channel has been given a name that corresponds with the instrument you selected. You can leave the name as is or rename the channel. To name a channel: setup joe’s mic mic enter go to the next channel...
4 1001108-01-a name the effects channels (or mixes) in the middle of a show it’s easy to forget which effect was intended for what performers or instruments so this would be a great time to name the effects send channels. For example, you might name an fx channel “voc delay” or “drum rev”. To name f...
5 1001108-01-a pitch correct to assign pitch correct to a channel: inputs 1-8 in 1 fx pitch correct enable the pitch correct effect is somewhat different than the reverb, delay, chorus and pitch shift effects. Pitch correct can only be used on one input channel at a time and there is one pitch corre...
6 1001108-01-a using the fx overview if you would prefer to see the send and return levels for all your effects at once, the fx overview is the place to go. To use the fx overview: menu fx overview 1. Input channels are arranged in columns. Use the nav strip to select a group of input channels. Each...
7 1001108-01-a dca nroups a dca groups faders together so the overall level of all the channels in the group can be controlled by a single dca fader. A dca fader does not change the position of any of the faders in the group. Important!: here is an important thing to know – if the dca master fader i...
8 1001108-01-a from a sub nroup to assign channels to a sub group: sub groups sub 1 setup in 1 this will take you to the sub group setup page. The lower portion of the page displays the numbers and friendly names of the input channels. Touch the button of the channels you wish to assign to the sub g...
9 1001108-01-a 3. Network mode: connect to router create network 4. Set password: enter an 8 digit password. 5. Touch apply and the mixer creates the network. Ireless connection to existing network when this method is used, touchmix-30 pro uses a wireless connection to an external router. Wi-fi devi...
10 1001108-01-a ired connection to a network or router using automatic ip addresses 1. Use cat-5 cable to, connect the touchmix-30 pro ethernet port to a port on the network router. 2. Mixer name: when a wireless devices looks for a network, this name is displayed. You can change this name here. 3. ...
11 1001108-01-a qsc nxd amplifier settings if you are using a qsc gxd amplifier, you can optimize the gain and sensitivity for use with your touchmix-30 pro. Refer to see "gxd amp settings" on page 51 phantom power (+48v) most condenser microphones and some direct boxes require phantom power from th...
12 1001108-01-a auxiliary (stage monitor) mixes there are two general approaches to setting up stage monitor mixes: input by input with all the performers on stage, ask each performer in turn to play or sing just one thing (kick, snare, guitar, sax, etc). Ask each performer how much of that instrume...
13 1001108-01-a peq tab six-band parametric eq with high / low-cut filters and a real time analyzer (rta) this tab displays the six-band, parametric equalizer plus the low and high-cut filters. The 6 bands of parametric eq can be individually bypassed using the numbered buttons. Bands 1 and 6 may be...
14 1001108-01-a limiter tab displays the limiter and its controls. We strongly encourage the use of the limiter for in ear monitors. Auxes tab the main l/r outputs may be returned to auxiliary mixes 1 – 14. Auxiliary mixes 9 -14 may be returned to auxiliary mixes 1 – 8. Refer to "patch matrix" on pa...
15 1001108-01-a qsc amplifier and speaker settings e series k series amplifiers refer to "level-match your qsc speakers" on page 10 and "qsc gxd amplifier settings" on page 11 . Also see "what is a channel preset?" on page 2 for information on preset voices for qsc e-series loudspeakers. Aux pick-of...
16 1001108-01-a sample rate in general, use 44.1 khz for cd projects, and 48 khz for video projects. Do not change sample rate while recording. To view or change sample rate: menu mixer setup sample rate 44.1 khz 48 khz multi-track recording the touchmix-30 pro is capable of recording 32 tracks of 3...
17 1001108-01-a mix down there are three ways to mix down your multi-track recording. • import the multi-track waves into a daw (digital audio workstation). See “transferring tracks between touchmix-30 pro and daw” above. • record the mixer’s analog output to an external 2-track recorder. Simply con...
18 1001108-01-a anti-feedback system the touchmix-30 pro includes twelve narrow-band, anti-feedback filters on each output. These filters are extremely useful for eliminating feedback frequencies while having very little effect on overall tonal balance. The filters may be adjusted manually or automa...
19 1001108-01-a lingering feedback problems if you have used the wizard or manual kill function to apply all twelve filters and your system is still unstable (prone to feedback) there are several other possibilities… • improper microphone selection or placement. • improper microphone technique. » th...
20 1001108-01-a mutes the touchmix-30 pro has a sophisticated and powerful mute system. In addition to the mute groups ( see "mute groups" on page 6 ) inputs and individual channel sends to individual aux mixes may be muted independently. Main mutes: when a channel is muted while the main l/r is sel...
21 1001108-01-a what’s displayed what will be copied & pasted main or auxiliary faders view fader and pan input channel overview tab eq, compressor, gate, fx sends, aux sends, digital gain, delay, group assigns, polarity input channel eq tab all channel eq parameters input channel comp tab all chann...
22 1001108-01-a to access the patch matrix: menu patch matrix note!: when the patch matrix is loaded for the first time after the mixer was powered on, it may take a few moments to display. The patch matrix displays the analog inputs across the top of the screen and the destination channels down the...
23 1001108-01-a matrix mixing to understand a matrix, it’s first useful to understand the concept of a sub-mix (sometimes called a “stem”). As the name implies, a sub-mix is a mix consisting of some subset of all the mixer’s inputs. For example there could be sub- mixes consisting of all the violins...
24 1001108-01-a note!: the low precision method uses just a single measurement while the medium and high precision methods require multiple measurements and repositioning of the microphone. The skip measurement method will retain the results of the last measurement but allow selection of one of the ...
25 1001108-01-a user buttons the touchmix-30 pro has eight user-assignable buttons (u1 – u8). By default these are assigned… • u1 – navigate left (moves the selection left) • u2 – clear clip (clears clipping indication from the navigation strip) • u3 – clear cue (clears all cue selections) • u4 – na...
26 1001108-01-a 3. Send a midi command to the mixer and that command will now be associated with the selected midi button. 4. To assign a function to the "learned" button: action selection detail security the touchmix-30 pro has multi-level security that allows you to assign passwords to various lev...
27 1001108-01-a monitor the monitor output is most commonly used to feed a pair of monitor loudspeakers. To adjust monitor level: monitor use the master rotary encoder. Touch close or push monitor to dismiss the pop-up. There are additional controls for the monitor output. To access additional monit...
28 1001108-01-a netting started top panel and remote-device controls 1. Trim knobs – channels 1 – 24 adjusts analog input signal level prior to a/d conversion. 2. Color lcd touchscreen – 3. Cue headphone jack – 1/4” stereo headphone jack. The output is controlled by clicking the cue button on a chan...
29 1001108-01-a device settings note!: for remote devices only. Lists any tm-30 pro mixers found on the network to which your device is connected. When multiple touchmix-30 pro mixers are connected to a single network, this page is used to select a single mixer to control with a tablet device. 1. Li...
30 1001108-01-a touchmix-30 pro specifications parameter specification display 10” (254mm) diagonal, 1024 x 600 pixel, color tft, capacitive multi-touch sensing inputs 32 total 24 mic/line, 20 xlr, 4 xlr combo 6 line, balanced, 1/4” trs + top panel 1/8” (3.5 mm) stereo 2 stereo usb / mp3 playback in...
31 1001108-01-a parameter specification crosstalk -80 db s/n ratio -94 db gain microphone inputs: 75 db (60 db analog, 15 db digital) maximum input level +16 db (xkr mic/line inputs), +26 db ( trs mic/line inputs), +24 dbu (trs line inputs), 0 dbv (top panel 1/8” stereo input) maximum output level +...
32 1001108-01-a feature navigation info system topic effects to auxes select an aux on left of screen > select fx masters fx masters, aux sends fx wizard menu > fx wizard wizards, fx wizard gain wizard menu > gain wizard wizards, gain wizard languages info > languages or menu > language 中文 , deutsch...
33 1001108-01-a home screen nav strip the nav strip provides the primary means of navigating between fader banks. In addition, it provides an overview of all fader positions for the selected mix and any clipping conditions. To access the nav strip – from any screen, press home once or twice to displ...
34 1001108-01-a input channels input channel − overview provides a single-screen view of frequently used controls and indicators for the input channel. 1. Overview tab – selects the channel overview screen. 2. Preset – shows the currently selected preset for this channel. Touch the + to change the p...
35 1001108-01-a to adjust the following parameters, select the field then use the master encoder or the up/down nudge buttons on a mobile device. • nate – engages or disengages the gate. • threshold – displays and sets the signal level at which the gate allows audio to pass. • attack – displays and ...
36 1001108-01-a input channel − eq controls and displays the settings for the input channel equalization. 1. Eq tab – selects the eq screen. 2. Eq in – engages / disengages the equalizer. 3. Rta on – engages the real time analyzer display. Note that a maximum of two rta displays are available at a t...
37 1001108-01-a input channel − compressor the compressor controls the dynamic range of a signal above a set threshold. 1. Comp tab – selects the compressor screen. 2. Comp in / out switch – engages and disengages the compressor. 3. Knee in button – determines how abruptly the compressor transitions...
38 1001108-01-a input channel − nate the gate passes audio above a set threshold, and attenuates audio below the threshold. 1. Nate tab – selects the gate screen. 2. Nate in switch – engages or disengages the gate. 3. Simple button – turns simple mode on and off. Hides all controls except: • gate in...
39 1001108-01-a input channel − fx sends controls how much of the input channel’s audio is sent to the fx devices. 1. Fx tab – selects the fx sends screen. 2. Fx overview button – navigates to the fx overview screen for a view of all 6 fx sends from all inputs. 3. Simple button – hides the global fx...
40 1001108-01-a input channel − aux sends auxiliary outputs are used to create a mix for stage monitors, in ear monitors, remote speakers or video / broadcast. There are 14 auxes and they may be linked for stereo. 1. Auxes tab – selects the aux sends screen 2. Aux overview button – navigates to the ...
41 1001108-01-a input channel − presets recall presets from the factory library. Store and recall user presets. . 1. Presets tab – selects presets screen. 2. Current preset – displays the name of the current preset. 3. Preset info (factory only) – touch to display details about a preset. Information...
42 1001108-01-a input channel − setup channel setup is provided for all input channels. Line input channels 25 - 30 do not have phantom power controls. 1. Setup – selects the setup screen 2. Name – displays the name of the channel. Touch to display a keyboard and rename the channel. 3. Link – links ...
43 1001108-01-a output channels output channel − overview provides a single-screen view of frequently used controls and indicators for the output channel. 1. Overview tab – selects the channel overview screen. 2. Preset – shows the currently selected preset for this channel. . 3. Pick-off point – (a...
44 1001108-01-a output channel − neq controls and displays the settings for main or auxiliary output graphic equalization. 1. Neq tab – selects the ge q screen. 2. Neq in/out switch – engages / disengages the equalizer. 3. Tuning in/out switch – engages / disengages the settings established by the r...
45 1001108-01-a output channel − peq controls and displays the settings for the main or auxiliary output parametric equalization. 1. Peq tab – selects the peq screen. 2. Peq in/out switch – engages / disengages the equalizer. 3. Rta on button – turns the rta (real-time analyzer) on and off. 4. Simpl...
46 1001108-01-a output channel − comp/limiter when set as a limiter, prevents the audio level from exceeding a preset threshold. 1. Comp / limiter tab – selects the comp /limiter screen. Note that the label on this tab will change depending on th setting of the comp/limiter switch. 2. Comp / limiter...
47 1001108-01-a output channel − anti-feedback available on the main l/r and aux 1 - 14 outputs, these narrow, cut-only filters are used for dealing with feedback. 1. Anti-feedback tab – selects the anti-feedback screen 2. Filters in/out – engages or bypasses the filters. 3. Feedback frequency – the...
48 1001108-01-a output channel − presets save, recall and copy the settings associated with an aux, sub group or main l/r output channel. 1. Presets tab – selects the presets screen. 2. Current preset – displays the name of the current active preset for the selected channel. 3. Save/save as – displa...
49 1001108-01-a output channel − setup various utility setup functions for aux and main output channels. 1. Setup tab – selects the setup screen 2. Channel name – displays the channel name. Touch to display a keyboard and rename the output. 3. Link (auxes only) – links adjacent channels. Odd numbere...
50 1001108-01-a output – speaker settings provides help in properly adjusting qsc k, kw and kla powered loudspeakers when used with the touchmix. 1. Select speaker – touch the button that corresponds with the qsc k, kw or kla speaker connected to the output. 2. Set the nain – adjust the gain knob on...
51 1001108-01-a nxd amp settings provides help in properly adjusting qsc gxd amplifier when used with the touchmix. On the nxd amplifier 1. Home – if the amplifier’s gain screen is not displayed, press the home button. If the gain screen is displayed, skip to the next step. 2. Adjust the gain a and ...
52 1001108-01-a aux overview provides an overview of all 14 aux mixes. The aux send and output levels may be adjusted on screen or, for greater precision, by touching turning the master control or using the buttons on your tablet device. When the aux overview is displayed, the nav strip display “gra...
53 1001108-01-a sub nroups sub nroup − overview provides a single-screen view of frequently used controls and indicators for the sub groups. 1. Overview tab – selects the sub group overview screen. 2. Preset – shows the currently selected preset for this sub group. Cannot be changed from this screen...
54 1001108-01-a sub nroup − peq controls and displays the settings for the sub group parametric equalization. 1. Eq tab – selects the peq screen. 2. Peq in/out switch – engages / disengages the equalizer. 3. Rta on button – turns the rta (real-time analyzer) on and off. 4. Simple button – hides the ...
55 1001108-01-a sub nroup − compressor / limiter the compressor reduces the dynamic range of a signal above a set threshold. When set as a limiter, prevents the audio level from exceeding a pre-set threshold. Note!: compressor and limiter have similar controls. Some of the labels and the color of th...
56 1001108-01-a sub nroups − fx sends controls how much of the sub group audio is sent to the fx devices. 1. Fx tab – selects the fx sends screen. 2. Fx overview button – navigates to the fx overview screen for a view of all 6 fx sends from all inputs. 3. Simple – hides the global fx parameters for ...
57 1001108-01-a sub nroup − auxes sub groups may be sent to auxiliary mixes. An aux may be used to output a single sub group or as a matrix to mix multiple sub groups. 1. Auxes tab – selects the aux sends screen 2. Aux overview – navigates to the aux overview which displays all aux mixes on a single...
58 1001108-01-a sub nroup − presets recall presets for the selected sub group channel. 1. Presets tab – selects the presets screen. 2. Current preset – displays the name of the currently active preset (if any). 3. Save / save as button – displays a page with options for naming a scene and selecting ...
59 1001108-01-a two-track playback two-track playback − overview provides a single-screen view of frequently used controls and indicators for the mp3 audio player and the 2-channel playback channel. The settings made here affect both mp3 and 2-channel audio. 1. Overview tab – selects the channel ove...
60 1001108-01-a two-track playback – eq 1. Eq tab – displays the audio player eq controls. 2. Peq switch – enables (in) / bypasses (out) the equalizer. 3. Rta on – enables / disables the real time analyzer. Note!: a maximum of two rta displays are available at a time on any combination of a mixer an...
61 1001108-01-a two-track playback – audio player plays mp3 audio files from a usb memory device. Note!: make sure the sample rate set in the mixer setup matches the sample rate of the mp3 file. 1. Audio player tab – touch to display audio player controls. 2. Mp3 songs – displays a list of mp3 title...
62 1001108-01-a two-track playback − auxes auxiliary outputs are used to create a mix for stage monitors, in ear monitors, remote speakers or video / broadcast. There are 14 auxes and they may be linked for stereo. 1. Auxes tab – selects the aux sends screen 2. Aux overview button – navigates to the...
63 1001108-01-a two-track playback − presets recall presets for the mp3 stereo and the 2-track playback. 1. Presets tab – selects the presets screen. 2. Current preset – displays the name of the currently active preset (if any). 3. Save / save as button – displays a page with options for naming a sc...
64 1001108-01-a two-track playback − setup rename the fx master channel, and assign the channel to mute and dca groups 1. Setup tab – selects the setup screen. 2. Name field – touch the name to display a keyboard that may be used to enter a name for the channel. 3. Reset button – returns settings to...
65 1001108-01-a 2-track – playback multitrack mode plays back audio recorded on the usb drive. Multitrack daw mode plays back tracks from a core audio compliant computer. 2-track playback plays files that have been recorded in usb sessions on tracks 31 and 32. If recording is stopped, then started a...
66 1001108-01-a fx masters fx master − overview provides a single-screen view of frequently used controls and indicators for the fx channel. 1. Overview tab – selects the channel overview screen. 2. Preset – shows the currently selected preset for this channel. Touch the + to change. 3. Effect – sho...
67 1001108-01-a fx masters − eq controls and displays the settings for the fx master channel equalization. 1. Eq tab – selects the fx master eq screen. 2. Eq in/out – engages / bypasses the equalizer. 3. Rta on – enables the real time analyzer. 4. Reset – sets the equalizer to factory default (flat)...
68 1001108-01-a fx master − setup rename the fx master channel, and assign the channel to mute and dca groups 1. Setup tab – selects the setup screen. 2. Name field – touch to display a keyboard and enter a name for the channel. 3. Reset button – returns settings to the factory default. 4. Effect pi...
69 1001108-01-a fx overview provides an overview of the channel fx send and return levels. Fx sends and fx master levels may be adjusted by touching (selecting) the control then using the master encoder or the nudge buttons on a tablet device. Note!: only input and sub nroup banks are selectable on ...
70 1001108-01-a izards fx izard the fx wizard aids in selecting and routing effects. 1. Fx1 - 6 tabs – selects one of six fx processors. Note!: the source, type, and fx preset windows provide a means of selecting an effect based on what the source is. If any of the lists fill the window, flick up on...
71 1001108-01-a tuning izard the room tuning wizard assists in adjusting output equalization 1. Tuning output – displays the system and friendly name of the output being tuned. 2. Restart – go back and start over. 3. Clear tuning eq – resets the geq, for the currently selected output to the factory ...
72 1001108-01-a fx processor fx processor – basic chorus the chorus fx varies the pitch of a signal at a steady rate to “thicken” a sound. You can access the effects from the inputs and sub group banks. 1. Effect – touch to select an effect type. 2. Preset – name of the current preset. Touch to acce...
73 1001108-01-a fx processor – dense reverb the dense reverb (presets with a “d” suffix) is a model of a dsp reverb with more dense reflections that some may find more representative of actual acoustic spaces. Input channels and sub groups are able to send to the effect. 1. Effect – touch to select ...
74 1001108-01-a fx processor – lush reverb reverb presets with an “l” suffix use a dsp reverb model with a more “lush” character. 1. Effect – name of the current effect. Touch to select an effect type. 2. Preset – name of the current preset. Touch to access the library of presets. 3. Simple button –...
75 1001108-01-a fx processor – mono and stereo delay these effects delay the audio signal to create echo and similar effects. Controls for the stereo delay may be linked or operated independently. Input channels and sub groups are able to send to the effect. Note!: tap tempo buttons are not availabl...
76 1001108-01-a fx processor – pitch shift the pitch shift raises or lowers the pitch of an audio signal by a fixed interval. In addition, the signal can be delayed from the original. The two output channels can be adjusted independently. 1. Effect – touch to select an effect type. 2. Preset – name ...
77 1001108-01-a fx processor – pitch correct corrects intonation of the audio signal. Important!: pitch-correct may be enabled/disabled by user buttons without regards to the position of the enable button on this screen. If you don’t hear any difference with pitch correct enabled, check to make sure...
78 1001108-01-a security provides four levels of password-enabled security to touchmix functionality. Login screen 1. Current login – the level of the person currently logged in. 2. Password – touch the white area to enter a password. If passwords are not set, go directly to the security settings. 3...
79 1001108-01-a miscellaneous features menu the menu provides links to various utility, setup and other functions. Touch a button to access the functionality. 1. Scenes ( scenes on page 87 ) 2. Security ( security on page 78 ) 3. Dca nroups ( dca group assignments on page 88 ) 4. Aux overview ( aux ...
80 1001108-01-a remote control settings allows or restricts access to mixer functionality by device. Note!: when a remote device is set to personal monitor mix, the cue and mute buttons are not available on the aux-mix- on-faders. Note!: some android devices use the model number as the device name. ...
81 1001108-01-a user buttons assign alternate functions to the user buttons. User buttons defaults: • u1 – navigate left • u2 – clear clip • u3 – clear cue • u4 – navigate right • u5 – play/stop • u6 – rec/stop • u7 – copy • u8 – paste 1. User 1 through user 8 – displays the current detail (function...
82 1001108-01-a mixer setup controls for various global and utility functions. 1. Cue mode – sets the function of the channel cue buttons. • cue (default)– touching a channel cue button causes the channel’s signal to be heard in the cue headphones. The audio signal is otherwise unaffected. • sip (so...
83 1001108-01-a phantom power supplies +48 vdc to xlr inputs including talkback. 1. Reset – returns all settings to factory default (all phantom power off). 2. Input channel buttons – touch to enable or disable phantom power for the channel. 3. Rear panel view xlrs – touch to enable or disable phant...
84 1001108-01-a mute nroups mute groups provide a means of muting multiple inputs and outputs from a single control. About mute nroups when a channel is in one or more mute groups, all mute groups containing the same channel and the channel mute itself, must be unmuted for audio to pass. When a chan...
85 1001108-01-a record / playback (multitrack usb drive) provides the controls to record and playback multiple channels. Record / playback – main screen important!: all usb memory devices must be formatted as fat32 to work with touchmix-30 pro. Drive performance is critical for recording. For more i...
86 1001108-01-a 2-track − recording the main l/r or aux 13/14 can be recorded on a usb device, then played back using 2-track playback. 2-track recording setup the files created from recording are on the external usb device installed in the mixer usb port. The files can be found under .Tmrecord\trac...
87 1001108-01-a real-time analyzer (rta) a maximum of two rta displays are available at a time on any combination of a mixer and tablet devices. Not available on a phone-type device. 1. The system and friendly name for the rta source. 2. Rta graph – 28, 1/3 octave bands, with peak-hold indicators av...
88 1001108-01-a dca nroup assignments dca groups are used to vary the gain of several channels at once from a single fader without changing the position of the channel faders. Dca groups also include a mute function. Note!: dca groups may also be accessed by touching menu > dca groups. About dca nro...
89 1001108-01-a midi setup the midi (musical instrument digital interface) setup provides the means to use a “class compliant” usb midi foot switch to control many functions of the touchmix mixer. This screen is not available on remote devices. Qsc has verified proper operation with these usb midi f...
90 1001108-01-a talkback / noise this screen controls the routing and level of talkback and noise. 1. Reset button – restores factory defaults for the talkback / noise generator. 2. Assignment buttons – select the destination for the noise or talkback signals. Note that it is possible to route talkb...
91 1001108-01-a network setup manage the mixer’s wireless or wired network. Connect an ipad, or iphone (ios 6 or later) or android device (kitkat 4.4 or later). The network configuration can only be performed on the touchmix. Ireless network setup important!: requires a compatible, usb wi-fi dongle ...
92 1001108-01-a phones and monitor phones and monitor level control phones (1) and monitor (2) cue level – control the level of the signal on the phones and monitor outputs. Note!: there are additional controls associated with the monitor system. See the mixer setup topic for details. Note!: by defa...
93 1001108-01-a recording setup – multitrack usb recall, initiate, and manage multitrack recording sessions. Scroll down for recalling a session. 1. Current session – displays the name of the currently active session. 2. New session – note!: when a new session is created, it is made the “ current se...
94 1001108-01-a aux mix on faders presents a single aux mix (bus) with large faders for the selected fader bank. The aux mix on faders screens show all the faders that are available to the selected aux mix. Aux mixes 9-14 aren’t available to any other auxes so they don’t appear on the nav strip or o...
95 1001108-01-a patch matrix manages connections between physical inputs and on- screen channels 1. Preset – displays the name of the current preset. ”default routing” is the reset or factory default preset. 2. Save / recall button – navigates to the patch matrix preset screen where patch matrix set...
96 1001108-01-a copy and paste the touchmix-30 pro has a powerful but simple copy and paste function that is operated by the u7 (copy) and u8 (paste) buttons. Copy and paste is context sensitive so that what you are looking at is what will be copied. Only like things may be copied and pasted from an...
97 1001108-01-a hat’s displayed hat will be copied & pasted output channel limiter tab all channel limiter parameters output channel fx tab all channel fx send levels output channel aux tab all channel auxiliary send levels and pan positions output channel setup tab recording arm, polarity, delay, d...
98 1001108-01-a dimensions 435 mm 17.1 in 428 mm 16.9 in 459 mm 18.1 in 191 mm 7.5 in 191 mm 7.5 in.
99 1001108-01-a 4-band peq meter low cut 24 db/oct high cut 12 db/oct 1 per mixer assignable pitch corrector digital input pan aux. Level (odd) aux. Level (even) stereo aux. Mode mono aux. Mode ch fader cue pre post digital gain trim track (from usb drive) from dca masters mic/line gain enable pre p...
Mailing address: qsc, llc 1675 macarthur boulevard costa mesa, ca 92626-1468 usa telephone numbers: main number: 1-714-754-6175 sales & marketing: 1-714-957-7100 or toll free (usa only) 800-854-4079 customer service: 1-714-957-7150 or toll free (usa only) 800-772-2834 facsimile numbers: sales & mark...