Qstarz BT-Q800 Quick Installation Manual

BT-Q800 Pro

 Bluetooth GPS Receiver 

1

BT-Q800 Pro Quick Installation Guide 

Thank you for purchasing Qstarz BT-Q800 Pro 16-Channel Bluetooth GPS Receiver. It is the world’s 

longest 30 hours of navigation and supports Smart Power control for power saving. 

Main features: 

z

Acquires 16 satellites all in view in parallel and ultra low power consumption 

z

Personal/Portable Navigation (PDA, Smartphone, Laptop, etc.) 

z

Smart power control – Auto detecting On-Off function for power saving

z

Fast Acquisition Rate within 5 seconds for hot start and 46 seconds for cold start.

z

Superior sensitivity -155dBm for urban canyon and foliage environment

z

Navigation time up to 30 hours in continuous mode

z

Bluetooth V1.2 SPP profile with operation range 10 Meters

A. Standard Package 

GPS Unit BT-Q800 Pro (1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + Travel Charger (4) + Warranty Card + Quick 

Installation Guide. 

(* Travel Charger plug type might be adjusted according to corresponding countries.)

1.                                                    2.                                          3.                                                  4.                                       

B. Appearance 

1.    Power jack (mini USB type)   

2.  Power switch  

3.    Battery status LED (Red/Green)   

4.    Bluetooth status LED (Blue)   

5.    GPS status LED (Orange)   

6.  Internal antenna  

7.  External antenna port (MMCX)  

C. Battery installation

C-1 Put Battery in place:

  Press the 

PUSH

 button on the bottom side of the unit (1) and pull out the battery cover. Insert battery in the 

unit (2) and put battery cover on to the cabinet (3), then push down and force it forward to fit firmly (4). 

                          1.                                                        2.                                                            3.                                                            4. 

C-2 Take Battery out:

  Press the 

PUSH

 button on the bottom side of the unit (1) and pull out the battery cover (2). Then take out the 

battery from the unit (3).   

                    1.                                                              2.                                                            3.                                                                       

D. Charging your battery 

For the first time using the BT-Q800, please charge battery until it is fully 

charged. Take the power cable and connect it to the power jack (mini USB 

type) and recharge through travel charger or car cigarette adaptor. This will 

begin to charge the battery. Charging time is 3 hours typically. 

- When the Power LED is Red, battery power is low status. Please recharge. 

- When the Power LED is Green, the battery is under charging mode. 

- When the Power LED is Off, the battery is fully charged.

1

６

7

２

４

３

５