QSurround Cine magic Owner's Manual

Manual is about: Built-in Home Theater System

Summary of Cine magic

  • Page 1

    Qsurround tm is a trademark of qsound labs, inc. Owner’s manual mhscb1-01 cube speaker system mhsfl1-01 in-wall speaker system mhsz21-01 zone 2 kit c ine m agic built-in home theater system.

  • Page 2

    Qsurround tm is a trademark of qsound labs, inc. Amplifiers mhsamp-06-wall 5.1 channel integrated amplifier mhsamp-06-cube 5.1 channel integrated amplifier mhsamp-01 zone 2 amplifier general information models mhsamp-06-wall and mhsamp-06-cube are identical except for the equalization circuitry with...

  • Page 3

    Qsurround tm is a trademark of qsound labs, inc. Operating instructions before operating system, please read this manual thoroughly and retain for future reference. Parts description amplifier 1 ac power plug 2 power indicator light 3 seven speaker connection output 4 zone 2 amplifier connection out...

  • Page 4

    Qsurround tm is a trademark of qsound labs, inc. Audio component cd player connection component may be connected through certain stereo components or directly through the television. If connection is made through the television, the audio out from the cd player should be connected to the audio in of...

  • Page 5

    Qsurround tm is a trademark of qsound labs, inc. If you feel the volume of the surround or subwoofer speakers are inadequate, perform the following: located on the top panel of the amplifier are volume adjustments for the surround and subwoofer speakers. Use a flat head screwdriver to adjust until t...

  • Page 6

    Qsurround tm is a trademark of qsound labs, inc. Additional rooms : the signal from the audio component connected to the amplifier will pass though to a zone 2 amplifier connected to the amplifier. Volume in the additional room can be controlled through an in-wall volume control located in the addit...

  • Page 7

    Qsurround tm is a trademark of qsound labs, inc. Specifications amplifiers mhsamp-06-wall mhsamp-06-cube mhsamp-01 output power 15 w x 7 15 w x 7 5 w x 2 load 8 ohm 8 ohm 8 ohm thd 0.1% 0.1% 0.1% frequency response front, center, surround front, center surround stereo 150-20 khz 200-20 khz 20-20 khz...

  • Page 8

    Qsurround tm is a trademark of qsound labs, inc. Warning to prevent fire or shock hazard, do not expose the unit to rain or moisture this symbol is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to cons...

  • Page 9

    Qsurround tm is a trademark of qsound labs, inc. River park, inc. 5.1 channel integrated amplifier zone 2 amplifier speakers limited warranty river park, inc. Warrants this product (including accessories) against defects in material or workmanship for a period of one (1) year from the date of purcha...

  • Page 10

    Qsurround tm is a trademark of qsound labs, inc. Installation amplifier the heat sinks on the amplifier must be mounted in a vertical position to allow for proper ventilation . Zone 2 amplifier speakers 6 ½” ceiling 1. Cut out hole size 7 ¾” diameter. A perforated template is part of the speaker pac...

  • Page 11

    Qsurround tm is a trademark of qsound labs, inc. Placement of speakers in-wall speaker placement cube speaker placement in-wall system center speaker (4”x 6” center) 1. Center the speaker as close as possible to the top of the television monitor. The speaker is magnetically shielded to prevent inter...

  • Page 12

    Qsurround tm is a trademark of qsound labs, inc. 4. The speaker is not magnetically shielded and needs to be at least two feet away from the television monitor. Surrounds (4” x 6” surrounds or 6 ½” ceiling) wall application 1. Placement on the wall directly behind the listening area or on the walls ...