QSurround Cine magic Owner's Manual - page 4
QSurround
TM
is a trademark of QSound Labs, Inc.
Audio Component
CD Player Connection
Component may be connected through certain stereo components or directly through
the television. If connection is made through the television, the audio out from the
CD player should be connected to the audio in of a video input on the television. Set
television to video input and control volume through the television (television screen
will be blank when operating under this connection). See illustration below:
Video
Component
Audio outputs from video components should be connected through the television.
The audio signal is passed through the television to the Amplifier. See illustration
below:
Zone 2 Amplifier
Hookups
Audio Component
The Zone 2 Amplifier connects directly to the Amplifier and will play music from
the audio component connected to the Amplifier. See illustration below:
Video
Component
A television can be connected to the Zone 2 Amplifier through an audio cable. See
illustration below:
Customizing Sound Fields