Qtx 3D OBJECTS 152.762UK User Manual - page 7
152.762UK User Manual
LAYOUT 3D OBJECTS LASER:
1.
Mounting bracket
2.
Thumb screw
3.
Laser Aperture
152.762UK User Manual
PACKAGE CONTENTS:
Please check the contents to ensure that the product has been received in good condition.
Laser x 1unit
User’s Guide x 1pc
IEC Power Lead x 1pc
Safety Keys x 2pcs
If you find any accessory is missing or the product has arrived with any problems, please
contact your retailer at once.
This product contains no user-serviceable parts so make no attempt to try to fix or modify this
item yourself as this will invalidate the warranty. We recommend you keep the original
package and proof of purchase for any possible replacement or returned demand.
SETUP:
1.
Unpack the laser ensuring all packaging and tape is removed.
2.
Always test the laser before fixing in a permanent location.
3.
Connect the IEC mains plug and power up.
4.
Insert the safety key and turn to a quarter turn clockwise. At this moment ensure that
no one is exposed to laser radiation.
5.
Select which mode you want to operate the laser in.
6.
Leave the laser to run for 10 minutes before installing in its location.