QTX Light LS-Elements Effects Laser User Manual - page 16
USER MANUAL
15
SOUND AVTIVATED SHOW (MUSIC SHOW) Stand Alone Mode
z
Press FUNC to enter MODE OPTION.
z
Till to LED panel shows Sou.
z
Press ENTER to confirm the setting.
The laser is working in standalone mode – SOUND ACTIVATED SHOW. Each
time when you turn on your laser, you will have this confirmed laser show.
Preprogram Fixed Pattern effect
z
Press FUNC to enter MODE OPTION.
z
Till to LED panel shows 011. This is preprogram fixed pattern effect mode.
There are 54 patterns optional in this fixture. 01* stands for pattern number,
press UP to select your favorite pattern from 01* to 54*. **1 stands for the
rotating speed of burst patterns effect. **1 to **4 is clockwise rotating, **5 is
not rotating, **6 to **9 is anticlockwise rotating.
z
Press UP/DOWN to select your favorite pattern and rotating effect.
z
Press ENTER to confirm the setting.
MASTER/SLAVE MODE
z
Press FUNC to enter MODE OPTION
z
Till to LED panel shows SLA
z
Press ENTER to confirm the setting.
The laser is working in “SLAVE MODE”. Connect MASTER laser and SLAVE
lasers with linking cable, the SLAVE lasers do what exactly MASTER laser does.
MANUAL control mode
z
Press FUNC to enter MODE OPTION.
z
Till to LED panel shows n11. This is manual control mode. The pattern could
be changed by turn the MOTOR 1 knob and MOTOR 2 knob on rear panel.
*1* stands for blanking effect. Press UP to select your favorite blanking
effect from *1* to *9*. **1 stands for the rotating speed of burst patterns
effect. Press DOWN to select your favorite rotating effect. **1 to **4 is
clockwise rotating, **5 is not rotating, **6 to **9 is anticlockwise rotating.
z
Turning MOTOR 1 knob and MOTOR 2 knob to do your pattern.
z
Press UP/DOWN to select your favorite blanking effect and rotating effect.
z
Press ENTER to confirm the setting.