Qtx PAV8-UHF User Manual - page 3
178.859UK User Manual
Main unit rear panel
1. USB port
2. Media player controls
3. CD/DVD disc slot
4. Treble EQ control
5. Echo control
6. Wired mics/guitar volume
7. UHF mic. A volume
8. UHF mic. A+B power & RF LEDs
9. Line output 2 x RCA
10. DC power input jack
11. Power on/off
12. Media player display
13. SD/MMC card slot
14. Bass EQ control
15. Main volume control
16. VCV voice controlled volume on/off
17. Contour tone shaping for UHF mics
18. UHF mic. B volume
19. 6.3mm mic.1/guitar jack input
20. 6.3mm mic.2 jack input
21. 3.5mm stereo Aux input
22. Line input L+R RCA
23. RCA composite video out
24. Battery & power status LEDs
25. 6.3mm satellite speaker out
Portability
For transport purposes, the PAV8-UHF main unit has a retractable handle and wheels. The
satellite speaker can be stacked on top of the main unit (ensuring that the feet locate onto the
posts at the top of the main unit) and a strap is provided to secure the satellite speaker to the
extended handle, allowing the whole set to be rolled as a trolley.
Care should be taken to avoid uneven terrain or dragging the trolley too quickly, which may
damage the wheels or cause the set to overbalance.
Setting up
The PAV8-UHF set is based around a main portable PA unit and a satellite speaker. Each can be
free standing or mounted onto 35mmØ speaker poles. Open the rear panel on the satellite unit
by removing the 4 thumb screws and use the speaker jack lead inside to connect the 6.3mm
input on the satellite to the Speaker Out jack (25) on the main unit. The rear cover may then
be put back onto the satellite cabinet if required. There is space inside the rear compartment
for other accessories, such as microphones, leads and the remote handset.