Qtx QX10BT User Manual - page 4
QXBT User Manual
If there is no output from Bluetooth, check if there is more than one device in range called “bluetooth”
In the eventuality that more than one device is called “bluetooth”, try each device in turn until the QXBT
unit is found. Check also that the volume level is turned up on the sending device.
Once audio is playing through the QXBT speaker from Bluetooth, adjust the rotary control (4) to the
required volume.
The QXBT speaker’s Bluetooth receiver has duplex Play/Pause control over the sending device.
Press the Bluetooth button on the rear panel to remotely pause or resume playback from the sending
device. This is useful when the audio is played from a phone in a pocket or on an armband or from a PC or
Mac computer.
Bluetooth on the QXBT speaker can only pair to a single device at any one time and should be operable
over a range of 5 to 8 metres.
Turning the rotary control fully down clicks the power off and shuts down the Bluetooth receiver.
Specifications
Model
QX8BT
QX10BT
Power supply
230Vac, 50Hz (fig.8)
Main driver
200mm (8”)
250mcm (10”)
Main driver coil size
35mm
52mm
HF unit
25mm (1”) titanium compression driver
Impedance
4Ω
Inputs
Line (6.3mm jack), Mic (XLRF)
Bluetooth version
v2.1
Dispersion
90° x 60° (H x V)
Output power RMS
100W
150W
Output power Max.
200W
300W
SNR
87dB
THD
0.1%
SPL @ 1W/1m
94dB
97dB
Max SPL
117dB
121dB
Crossover frequency
4kHz
Frequency response
55Hz – 20kHz
48Hz – 20kHz
Dimensions
290 x 400 x 225mm
320 x 470 x 270mm
Weight
6.8kg
8.0kg
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd.