Quad Electroacoustics L-ite Series User Manual - page 4
3
22
What’s in the Box?
The packaging contains the following items:
One pair of L-ite
Satellite loudspeakers
This Instruction Manual
Warranty Registration Form
#
#
#
2
#
One pair of cotton gloves
L-ite Satellites
2
One carton contains:
#
#
#
#
Four L-ite
Satellite loudspeakers
This Instruction Manual
Warranty Registration Form
One pair of cotton gloves
2
#
One L-ite
Centre loudspeaker
2
The other carton contains:
#
#
#
#
#
#
#
#
One L-ite
Powered Subwoofer
One IEC mains lead fitted with an appropriate mains connector for your country
Instruction Manual
Warranty Registration Form
Remote Control Handset plus two LR6/AA batteries
4 adjustable standard feet
4 adjustable spiked feet
One Pair Cotton Gloves
2
The Quad L-ite
System
2
Each carton contains the following items:
One L-ite
Centre loudspeaker
This Instruction Manual
Warranty Registration Form
One set of four adhesive feet (attached to the underside of the cabinet)
One pair of cotton gloves
#
#
#
#
#
2
L-ite
Centre
2
Consult the dealer from whom you purchased the equipment if any of these items is not present.
Specifications
Quad L-ite 2 loudspeakers are supplied in the following combinations:
#
#
#
#
A pair of L-ite
Satellite loudspeakers
A single
2
L-ite
Centre loudspeaker
The L-ite
System: this features four L-ite
Satellites, one L-ite
Centre and one L-ite
Subwoofer.
2
2
2
2
2
A single L ite
Powered Subwoofer
-
2
L-ite Series
2
L-ite Series
2
Transducer Complement
Cone Bass driver
Input impedance
Frequency response (boundary)
Avg. max output @ 1m
Crossover Range
Single Tri-Lam Driver
10” 250mm
10 kOhms
25Hz-95Hz
108dB
L-ite
Subwoofer
2
Amplifier Output Power (RMS)
300 Watts
Line Input sensitivity
250mV for 100W output
35 - 85Hz (plus bypass)
Enclosure type
sealed
Construction material
15 & 25mm MDF
Product dimensions H x W x D
485 x 288 x 425 (plus connectors)
2 Way
4” 100mm
1” 25mm
6 Ohms*
70Hz-28kHz
32kHz
86dB
75 Watts
30–120W
ported
70Hz
2.2kHz
15 & 25mm MDF
Transducer Complement
Cone Bass driver
Soft Dome Tweeter
Nominal impedance
Frequency response - 6dB
Upper frequency limit -10dB
SPL 1W @ 1m
Power Handling
Continuous Programme
Recommended Amplifier Power
Enclosure type bass/mid
System Fb
Crossover frequencies
Construction material
Piano finish wood veneers of cherry, rosewood, birds eye maple
Piano black and piano silver
Finish (all models)
L-ite
Satellite
2
2 Way
1” 25mm
6 Ohms*
80Hz-28kHz
32kHz
87dB
85 Watts
30–150W
ported
75Hz
2.5kHz
15 & 25mm MDF
L-ite
Centre
2
2 x 4” 100mm
*Quad loudspeakers are compatible with all standard 4 and 8 Ohm amplifiers
225 x 135 x 160
Product dimensions H x W x D
135 x 340 x 160
Piano finish wood veneers of cherry, rosewood, birds eye
Piano black and piano silver
Finish (all models)
The system comes packed in two cartons.