QUAD Vena Owner's Manual - page 12
Playing Music via Apple Docking
Connect an Apple unit as shown in the following list via a specified Apple USB cable to the iPhone/iPad/iPod input on Vena’s rear
panel. Press the iPod button on the front panel, iPod indicator will be lit. Click Play in the music player software on Apple unit to
start playing. Only use Vena to control the volume level, volume control functions on Apple unit will be disabled.
Vena Apple docking is made for:
·
iPhone 5
·
iPhone 4S
·
iPhone 4
·
iPad (4th generation)
·
iPad mini
·
iPad (3rd generation)
·
iPad 2
·
iPod touch (5th generation)
·
iPod touch (4th generation)
·
iPod touch (3rd generation)
·
iPod nano (7th generation)
·
iPod nano (6th generation)
·
Made for iPod nano (5th generation)
Note: Models not listed here may be supported by Vena despite not having undergone compatibility testing.
iPhone, iPad and iPod models will charge their battery continuously when docked if Vena is connected to mains power.
“Made for iPhone”, “Made for iPad” and “Made for iPod” mean that an electronic accessory has been designed to connect
specifically to iPhone, iPad or iPod, respectively, and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that
the use of this accessory with iPhone, iPad or iPod may or may not affect wireless performance.
Playing Music via Bluetooth
You can wirelessly connect Vena to a music source via Bluetooth wireless technology. Volume up/down, standby and mute in/out
can be controlled from either your Bluetooth source or from Vena. Other functions – play, pause, previous track, next track, fast
forward and reverse are all controlled from your Bluetooth source only.
Establishing a Bluetooth Connection
1. Place Vena and a Bluetooth music source within a few meters of each other.
2. Power on Vena and select Bluetooth as the source. The Bluetooth source indicator will flash twice when in pairing mode.
3. Activate the Bluetooth function on your music source.
4. Select “Quad Vena” when Vena is found to start the pairing process.
5. If prompted for a password, enter “0000”.
To play music
Select Vena as a music output device on your Bluetooth source to start playing music.
Disconnecting Bluetooth Connection
To disconnect the Bluetooth music source either:
·
Move the Bluetooth source beyond the communication area.
·
Turn off the connected device or turn off its Bluetooth function.
Note:
If you have difficulty connecting Vena to a Bluetooth device, please try selecting “Forget this Device” on your source unit and
then go through the connection procedure again.
Made for