Quadra Byke QUAD-TRIKE-BIKE Owner's Handbook Manual

ASSEMBLY INSTRUCTIONS IMPORTANT:

Always read these instructions before assembly, 

We have assembled as much of the Quadrabyke as possible, and by following the 

instructions for assembly and choosing the wheel configuration that will suit your childʼs 

ability, your Quadrabyke with proper care and maintenance will give years of fun. 

General  Care  and  Maintenance:  Ensure  that  all  nuts  are  secure  and  the  brakes  are 

functioning correctly before use. Wash and lubricate as part of the regular care, Only use 

genuine replacements parts - contact selling agent/dealer.

WARNING: This Quadrabyke must be properly assembled and adjusted before use. 

We cannot be held responsible for any damage caused by improper assembly, adjustment 

and maintenance.

Important note: This product is not suitable for children under the

                            age of 36 months, contains small parts. Age range 3 years and above.

1.   Read the instructions first before assembling. Adult assembly is required. 

      See instructions over. 

2.   Please keep this instruction manual for future reference. 

3.   Quadrabyke is for home and garden use must not be ridden in traffic surroundings.  

3.   The Quadrabyke does not comply with the UK road regulations 

5.   Warning!  A protective helmet should be worn when using this product!

6.   Parents, Carers should ensure that children are properly supervised and instructed in  

      the use of the Quadrabyke, particularly safe use of the braking systems.

      Right Hand Brake Lever operates the Front Brake and the Left Hand Lever

      operates the Rear Brake. Extra distance will be required in wet weather.

7.   Regular checks should be carried out on the Quadrabyke ensuring that 

      brakes, tyres, steering and wheels are in safe a condition.

8.   Ensure the minimum saddle and handlebar height insertion marks are correct 

      - refer to ‘Seat’ & ‘Handlebar’ information over.

9.   Ensure all fasteners are tightened correctly including the stem to steering locknut,  

      seat  post to frame locknut at a 20Nm torque and wheels nuts secured firmly by hand.

10. Quadrabyke is suitable for a age range of 3yrs and above with a maximum

      load capacity of 35kgs, including rider, luggage and Quadrabyke

11. Contains small parts not suitable for children under 36 months.

12. The chain requires no maintenance and is not adjustable, however the chain cover can

      be opened by levering with a screwdriver, to allow access to clean and lubricate.

Remove all parts from the carton before assembly and refer to drawings contained within 

the Owners Manual before assembling your Quadrabyke.

 Handi Hint: After assembling the Handlebars and Saddle turn the bike over to 

      assemble the wheels.

2

11

Handlebar Assembly

First, place the handlebar stem through 

the plastic clamp cover. Then loosen the 

front fork nut and insert the handlebar 

stem into the top of the front fork tube, 

make sure that the minimum insertion 

mark is not visible. Tighten the clamp with 

bolt, washer and nut. Slide the clamp 

cover down over the fork clamp.

NB. Ensure handlebars are in line with 

front forks.

Warning: The minimum insertion

   mark should not be visible.

Saddle Assembly

Insert the saddle stem into the seat tube.

Make sure that the minimum insertion 

mark is not visible. 

Tighten the seat clamp with the bolt, 

washer and dome nut.

Warning: The minimum insertion

    mark should not be visible.

SEAT

HANDLEBARS