Quadra Byke QUAD-TRIKE-BIKE Owner's Handbook Manual - 1 Wheel Front and Rear
1 Wheel Front and Rear
2 Rear Wheels
8
5
L
L Long Axle Rear for Four wheels Format
Black Nut and Washer for each side
M
M
M Medium Axle Assembly for One wheel front and rear
Lock Nuts and Washers
Spacer
1. Place the spacer as show
1. Place wheel between bearings
as shown.
2. Insert Medium Axle through
wheel bearings and wheel
3. Place washer onto axle
4. Thread Black Lock Nut onto
axle and ensure it is fully tighten
and secure
6. Thread Black Lock Nut onto
axle and ensure it is fully tighten
and secure
NB. Now repeat the process for the front axle.
Always check that all Black Lock Nuts are tight
and secure before use
5. Now on the opposite side,
place a washer onto the axle
2. Insert axle marked ‘L’ passing
through wheel bearings and
spacer
4. Place washer onto axle as
shown
6. Ensure that Black Locknut is
fully tigthen and secure
7. Place wheel on the opposite
end of axle
7. Place washer onto axle
8. Thread Black Lock Nut onto
axle and ensure that it is fully
tighten and secure
5. Thread Black Lock Nut onto
axle
3. Place wheel onto axle
Items Required
Items Required