Quadral MAGIQUE User Instructions - English
18
19
ENGLISH
Installing
1. Check that all of the devices are switched off.
2. Use the mains cable that we have provided to connect up the unit to the mains power
supply.
3. Now connect up all of your other devices (TV, DVD player, etc.)
4. Use the mains switch at the back of the unit to switch the unit on.
5. Press the POWER button (1) on the remote control first and then press the button (2)
to select the source that you want to use.
6. Bluetooth connection
7. The display LED will flash rhythmically if the input is selected (2 x on / pause / 2
x on). The link will be established automatically if the source has been linked up to
the MAGIQUE previously and the blue display LED will be permanently lit.
8. Press the “ CODE” button (3) on the remote control if you want to establish a new
link with a unit. The display LED will then flash rapidly and your MAGIQUE will
send out a pairing signal to establish the link.
9. “quadral MAGIQUE” will now be displayed on your Bluetooth device’s display and
the link will be permanently established after you have confirmed the link to this unit
and the blue display LED on your MAGIQUE will be continuously lit.
10.You can change the volume from your device (smart phone or PC) as well as by
using the buttons (4) on your remote control.
Note:
You do not need to enter a PIN code to pair up your MAGIQUE to a smart phone
or PC if they use BT standard v2.1 or later. You should enter a “0000” PIN code for
pairing up if version 2.0 or older is being used.
Only a single device can be paired up to your MAGIQUE at the present moment.
Specifications MAGIQUE
Power
4 x 20 Watt / 4 Ohm
Stereo bi-amping circuit
2 x 20 Watt per channel
Harmonic distortion (Klirr)
Frequency response
55 Hz – 25,000 Hz
Inputs
Analog
2 x RCA
Digital
1 x optical / 1 x coaxial
Bluetooth
Yes
Equipping
Woofer per channel
1 x 150 mm
Midranges per channel
2 x 65 mm
Tweeter per channel
19 mm silk dome
Remote control
Infrared
Dimensions
Height
104 mm
Width
600 mm
Depth
363 mm