Quadro CTV-37D10 TXT Service manual - Operation Instructions
-30-
3
3
-
Operation Instructions
LOCATION OF CONTROL (REMOTE HANDSET UNIT)
PICTURE MODE BUTTON(P.M.)
Press this button to select the desired picture mode,RICH.USER.SOFT and STANDARD can be selected
cyclically.
MUTE BUTTON( )
Press once to mute the sound, press again to return to previously set sound level.
VOLUME UP/DOWN BUTTONS (VOL.+/-)
Press Volume Up/Down Buttons to adjust sound level.
PROGRAM SELECTION BUTTONS(0-9)
Push the number for your desired program and the program indicator will be displayed on the screen.
Press number key 0-199 for program selection.
Press the number keys to select teletext pages in teletext mode.
COLOUR BUTTONS(RED/YELLOW/GREEN/BLUE)
In TV mode, the (GREEN)/ (BLUE) buttons has the same function as PROG+/- buttons; the (RED) /
(YELLOW) buttons has the same function as VOL+/-button.
In TELETEXT mode, press these colour buttons, the color of page no of teletext will change to the same
colour as that of the buttons.
DIGIT BUTTON(--/---)
Press this button to select program between 0-199 program.
To select a one-digit number: press "--/---" button to display "-",then press 0-9 to select a number 0-9,or
press the number 0-9 direvtly.
To select a two-digit number: press "--/---" button to display "--".then press 0-9 to select a number 10-99.
To select a three-digit number: press "--/---" button to display "1--".then press 0-9 to select a number 100-
199.
MENU RECALL BUTTON( )
Press this button sequential to recall for the program number, system, logo etc on the screen..
*Picture mode "RICH, SOFT , STANDARD" are fixed by factory, all the change of these settings will be
saved into the" USER"mode automatically.
S.M. BUTTON
No use.