Quadro QuadroE1/T1 Installation Manual - page 42
QuadroE1/T1 Manual I: Installation Guide
Configuring the Quadro E1/T1
QuadroE1/T1; (SW Version 3.2.x)
42
Enable Activity Timeout checkbox is used to limit time-to-live period of routing pattern
(makes sense if accept or failure feedback arrives too late from the destination). Checkbox
selection enables the Activity Timeout text field which is used to insert a routing pattern ac-
tivity timeout (in the range from 1 to 180 seconds). When timeout is configured, the routing
pattern will be active within the defined time frame and if no response has been received
from the destination during that period, the pattern will be stopped and next routing rule
might be optionally considered (depending on the Fail Reason configuration on the corre-
sponding pattern).
Use RTP Proxy checkbox is available for SIP, H323 and IP-PSTN call types and is applica-
ble only when route is used for calls through Quadro between peers both located outside the
Quadro. When this checkbox is selected, RTP streams between external users will be
routed through Quadro, otherwise, when checkbox is not selected, RTP packets will be mov-
ing directly between peers.
Voice Transcoding checkbox is available for SIP, H323 and IP-PSTN call types and is
meaningful when an extension is selected from the Use Extension Settings drop down list.
Checkbox selection results the voice transcoding when performing IP calls through Quadro.
Independent on the codecs supported by the caller, Quadro will use the codecs of the ex-
tension selected from the Use Extension Settings drop down list to establish a call with the
Destination. If the Destination supports either of the codecs configured for the used exten-
sion, the call between the caller and the Destination will be established by the first preferred
codec of the Destination. If the Destination does not support either of the codecs configured
for the used extension, the call will be disconnected.
AAA Required selectionis used to choose one or more Authentication, Authorization, and
Accounting (AAA) settings:
•
Local Authentication – with this checkbox selected, callers will need to pass au-
thentication through Local AAA table (see below) when dialing the current pattern.
•
RADIUS Authentication and Authorization – checkbox is present when RA-
DIUS client is enabled. With this checkbox selected, when dialing the current pat-
tern, callers will need to pass the authentication through RADIUS server (see
above).
•
RADIUS Accounting - checkbox is present when RADIUS client is enabled. With
this checkbox selected, no authentication will take place, but a caller identifying
CDR (call detail report) will be sent to the RADIUS server. Checkbox selection en-
ables accounting on the RADIUS for the certain call.
If the authentication is configured based on the caller’s address, callers will pass the
authentication automatically; otherwise they will be required to identify themselves by a
username and a password.
Fail Reason offers a list of fail reasons depending on the selected call type. If the selected
fail reason occurs, the local routing table will be parsed for the next matching pattern, and if
found, the call will be routed to the destination specified there. In the example described
here, the default value None is used.
The Transport Protocol for SIP messages manipulation radio buttons group is available
for SIP or IP-PSTN call types only and allows you to select the transport (UDP or TCP) to
transmit the SIP messages through.
The SIP Privacy manipulation radio buttons group is only available for the SIP call type and
allows you to select the security of the SIP route by means of hiding (or replacing, depend-
ing on the configuration of the SIP server) the key headers of the SIP messages used to es-
tablish the call.
•
Default Privacy – with this selection, Quadro specific SIP privacy will not be applied
and all privacy will rely on the configuration of the SIP Server.
•
Disable Privacy – with this selection, SIP call security will not be disabled and all
headers of the SIP message will be transparently visible to the destination.