Qualcast GT2518 Instruction Manual - page 7
Important - Please read these instructions fully before starting assembly
7
Customer Helpline 08456 400 800
• Never use the appliance when any guard or housing element is damaged or not in place.
• Ensure that the appliance will operate properly and perform its intended function.
• Have any damaged or defective parts repaired or replaced an authorized repair agent.
• Before use, check the mains cable for signs of damage, ageing or wear.
• Do not use the appliance if the mains cable is damaged or defective.
• If the mains cable is damaged or defective it must immediately be repaired by an authorised repair
agent to avoid any further hazard.
• Never attempt to remove or replace any parts other than those specified in this manual.
General safety during usage
This tool is double insulated; therefore no earth wire is required. Always check that the power supply
corresponds to the voltage on the rating plate.
• Before using the appliance, check that your cutting path is free from sticks, stones, wire and any other
dangerous objects that may cause damage or be projected
• Only use the appliance in the correct position, with the cutting line near the ground. Never switch the
appliance on in any other position.
• Switch on the appliance only when hands and feet are at a safe distance from the cutting line.
• Avoid any body contact with the cutting line while the appliance is running.
• Do not work on steep slopes, be sure of your footing. Be aware that freshly cut grass is damp and
slippery.
• Use only the appropriate of cutting line. Never use metal cutting line or fishing line.
• After extending new cutting line, always return the appliance to its normal operating position before
switching on.
• Take care to keep the mains cable away from the cutting line. Always be aware of the position of the
cable.
Precautionary Measures (continued)
Safety Information