Qualcast MEB1234M Instruction Manual - Important.
Important.
Wear work gloves!
Only replace the blade with a genuine replacement blade, as this will ensure
top performance and safety under all conditions.
Carry out the following steps to change the blade:
► Undo the fastening screw.
► Remove the blade and replace with a new one.
► When fitting the blade, make sure it is installed in the right direction. The
blade’s wings should be angled upwards (towards the mower).
► Then retighten the fastening bolt. The tightening torque should be approx.
25 Nm.
Carbon brushes
► In case of excessive sparking, have the carbon brushes checked only by a
qualified electrician. Important! Carbon brushes should only be replaced by
by a qualified electrician.
Maintenance and storage
► There are no parts inside the equipment which require additional
maintenance.
► keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition;
► check the grass collector frequently for wear or deterioration;
► replace worn or damaged parts immediately.
Disposal and recycling
Do not dispose with household waste.
Recycle products and components according to local legal
requirements.