Qualcast YT623105X) Instruction Manual - Assembly
ASSEMBLY
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
4. Your product is now ready to be used.
ASSEMBLY
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
4. Your product is now ready to be used.
ASSEMBLY
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
4. Your product is now ready to be used.
ASSEMBLY
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
WARNING! Check the voltage! The voltage must
label!
4. Your product is now ready to be used.
ASSEMBLY
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
WARNING! Check the voltage! The voltage must
label!
4. Your product is now ready to be used.
ASSEMBLY
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
WARNING! Check the voltage! The voltage must
label!
4. Your product is now ready to be used.
ASSEMBLY
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
Connection to the
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
Connection to the P
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
Fig.
2. Ensure the on/off switch (5) is in its off position “0”.
3. Connect the plug of 10M cable.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
Power
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
Fig.
2. Ensure the on/off switch (5) is in its off position “0”.
of 10M cable.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
ower
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
firmly secured (Figs. 4, 5).
4
2. Ensure the on/off switch (5) is in its off position “0”.
of 10M cable.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
ower S
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
4
2. Ensure the on/off switch (5) is in its off position “0”.
of 10M cable.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
Supply
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
4
2. Ensure the on/off switch (5) is in its off position “0”.
of 10M cable.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
upply
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
of 10M cable.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
upply
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
upply (continued)
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
(continued)
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
WARNING! Check the voltage! The voltage must
4. Your product is now ready to be used.
(continued)
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
WARNING! Check the voltage! The voltage must
13
(continued)
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
WARNING! Check the voltage! The voltage must
(continued)
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
WARNING! Check the voltage! The voltage must
(continued)
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
WARNING! Check the voltage! The voltage must comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
2. Ensure the on/off switch (5) is in its off position “0”.
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
Fig. 5
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
Fig. 5
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
Fig. 5
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
the motor unit. Pull it over the cord retainer (9) and gently tug on the cord to ensure that it is
comply with the information on the rating
1. Double the cord back, about a foot from the end and lead the loop through the hole on
it is
it is