Qualcast YT623105X) Instruction Manual - Operation
OPERATION
Harness
2. Attach the harness (3) to the loop (2) on the upper side of
3. Open the buckle to quickly release the harness (3).
Tube Length
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
Operating Mode
1.
OPERATION
Harness
2. Attach the harness (3) to the loop (2) on the upper side of
3. Open the buckle to quickly release the harness (3).
Tube Length
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
Operating Mode
1.
OPERATION
Harness
2. Attach the harness (3) to the loop (2) on the upper side of
3. Open the buckle to quickly release the harness (3).
Tube Length
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
Operating Mode
Select the operating mode by moving the mode lever (10) to the respective symbol.
OPERATION
Harness
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Tube Length
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
Operating Mode
WARNING! Always turn the product off and let it come to a complete stop before changing the
operating mode!
Select the operating mode by moving the mode lever (10) to the respective symbol.
OPERATION
Harness (
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Tube Length
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
Operating Mode
WARNING! Always turn the product off and let it come to a complete stop before changing the
operating mode!
Select the operating mode by moving the mode lever (10) to the respective symbol.
OPERATION
(continued)
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Tube Length
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
Operating Mode
WARNING! Always turn the product off and let it come to a complete stop before changing the
operating mode!
Select the operating mode by moving the mode lever (10) to the respective symbol.
OPERATION
continued)
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Tube Length
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
Operating Mode
WARNING! Always turn the product off and let it come to a complete stop before changing the
operating mode!
Select the operating mode by moving the mode lever (10) to the respective symbol.
continued)
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
Operating Mode
WARNING! Always turn the product off and let it come to a complete stop before changing the
operating mode!
Select the operating mode by moving the mode lever (10) to the respective symbol.
continued)
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
Operating Mode
WARNING! Always turn the product off and let it come to a complete stop before changing the
operating mode!
Select the operating mode by moving the mode lever (10) to the respective symbol.
continued)
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
operating mode!
Select the operating mode by moving the mode lever (10) to the respective symbol.
continued)
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Adjust the tube length if required.
1. Press the release button (17)
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Adjust the tube length if required.
1. Press the release button (17) and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
Adjust the tube length if required.
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
Fig. 7
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
15
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
Fig. 7
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
Fig. 7
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
3. Open the buckle to quickly release the harness (3).
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
2. Attach the harness (3) to the loop (2) on the upper side of the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
other to retract or pull away from each other to extend (Fig. 7).
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
the motor unit (Fig. 7).
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
WARNING! Always use the product with the harness! Do not carry it only with your hands!
and push the nozzle (15) and lower tube (16) towards each
WARNING! Ensure that the release button engages in one of the three possible positions!
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
and push the nozzle (15) and lower tube (16) towards each
WARNING! Always turn the product off and let it come to a complete stop before changing the
Select the operating mode by moving the mode lever (10) to the respective symbol.
and push the nozzle (15) and lower tube (16) towards each
WARNING! Always turn the product off and let it come to a complete stop before changing the
WARNING! Always turn the product off and let it come to a complete stop before changing the